SYBA SY-PEX40039 2 Port SATA III PCI-e 2.0 x1 Card

The SYBA SY-PEX40039 add-on card instantly adds two extra SATA ports to any desktop with an available PCIe slot. It complies with SATA III 6Gbps standard, and supports Native Command Queue (NCQ) to make the most of the latest HDD and SSD. The PCIe 2.0 x1 host interface provides up to 5Gbps bus speed to match the performance of your high speed drive. Plus, this card is bootable, thus you can use it with your main SSD loaded with OS and secondary HDD with massive storage capacity.

• ASM1061 Chipset (Asmedia 1061 SATA Host Controller)
• Compliant with PCI-Express Specification V2.0 and Backward Compatible with PCI-Express 1.x
• Compliance Serial ATA AHCI Spec. Rev. 1.3, Serial ATA Rev. 3.0
• Supports Hot Plug and Hot Swap
• Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
• Supports 2 Ports Serial ATA
• Supports Native Command Queue (NCQ)
• Supports Port Multiplier
• This card is bootable.
• Can use 2 at same time.
• Works with SSDs

Note:

• SATA ports may not be seen natively by motherboard BIOS made before 2010.
• Each SATA port can only support 1 HHD/SSD connected.
• However, using Port Multiplier (example: 40037/40074), it can support 4 or More HHDs with 1 SATA port for Windows OS.
• Mac OS and Linux OS limit is 4 Hard drives.
• Drives connected, may need to be initialized.
• Support Windows Server 2012 (Uses Windows Server 2008 Driver)