| Product SKUs |
| MBD-C7X99-OCE-F -B |
C7X99-OCE-F (Bulk Pack) |
| Physical Stats |
| Form Factor |
ATX |
| Dimensions |
12" x 9.6", (30.5cm x 24.4cm) |
| Processor/Cache |
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3, E5-1600 v3 family or Intel® 4th gen. Core™ i7 series (up to 160W TDP **)
- Single Socket R3 (LGA 2011)
|
| Core / Cache
|
Up to 22 Cores† / Up to 55MB† Cache |
| Note |
† BIOS version 2.0 or above is required |
| Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| System Memory |
| Memory Capacity |
- 8x 288-pin DDR4 DIMM slots
- Supports up to 64GB DDR4 Non-ECC Un-Buffered memory (UDIMM) in 8 DIMM slots
|
| Memory Type |
- Frequency up to 3300MHz(OC) non-ECC DDR4 SDRAM 72-bit, 284-pin (UDIMM) gold-plated DIMMs
- Support overclocking up to 3300MHz*
-
* Please check the operation manual for supported components
|
| DIMM Sizes |
8GB, 4GB, 2GB, 1GB |
| Memory Voltage |
1.2V |
| On-Board Devices |
| Chipset |
Intel X99 chipset |
| SATA |
- SATA3 (6Gbps) via Intel X99 controller
- 10x SATA3 ports: 6x iSATA (RAID 0, 1, 5, 10) and 4x sSATA
|
| Network Controllers |
- Intel® i210-AT Dual Port Gigabit Ethernet
- Share with IPMI
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
RealTek ALC1150 High Definition Audio |
| Graphics |
ASPEED AST2400 BMC (for IPMI only) |
| Input / Output |
| SATA |
10x SATA3 (6Gbps) ports |
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- Shared with IPMI
|
| USB |
- 8x USB 3.0 ports (6 rear + 2 via header)
- 4 of 8 USB 3.0 ports upgradable to 4x USB 3.1 (10Gbps) (2 rear + 2 via header) (This upgrade is BOM option for OEM only)
|
| Audio |
7.1 HD Jacks |
| Video |
1x VGA (Aspeed AST 2400 BMC for IPMI) |
| Keyboard/Mouse |
1x PS/2 Keyboard/Mouse port |
| Serial Port / Header |
1x header |
| TPM |
1x TPM 1.2 20-pin Header |
| Expansion Slots |
| PCI-Express |
- 4x PCI-E 3.0 x16 slots (run at 16/16/NA/8 or 16/8/8/8)
- 2x PCI-E 2.0 x1 (in x4) slots
- PCI-E slot #1 supports (x4) and slot #4 (x16) is disabled when Intel Core i7-5820K is installed
|
| System BIOS |
| BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
| Management |
| Software |
- IPMI 2.0
- SuperDoctor® III
- Watch Dog
- Due to Intel Client ME limitation, this Board supports all SUM features well but "OOB Biosupdate"
|
| Power Configurations |
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| PC Health Monitoring |
| Voltage |
+12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT |
| FAN |
- Total of 5 fan headers supporting up to 5 fans
- 5 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend static indicator LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- RoHS
|