Connectors: Drive Connectors: 1 x SFF-8482 (29 pin, Data & Power, Internal SAS) Receptacle Host Connectors: 1 x 22 pin SATA / SAS Data + Power (7 + 15 pin) Receptacle
Supports 2.5" form factor drives up to 15 mm in height
Installs into an internal or external 3.5" drive bay; uses standard mounting holes for internal installs
Tool-less 2.5" drive installation
Supports SATA I, II and III (up to 6Gbps) and SAS I and II (up to 6Gbps)
Note: Although mobile racks can enable a Serial Attached SCSI (SAS) drive to connect using a standard Serial ATA (SATA) connector, the drive controller must be SAS compatible to properly support SAS drives. SAS controllers can work with SAS and SATA drives, but most SAS drives will only work with a SAS controller.
1 x hard drive adapter 1 x set of mounting hardware 1 x quick-start guide