Specifications: LCD Size: = 24"
Weight Capacity: <= 25 lbs(= 11.3 kg)
Tilt: 180°
Pan: 360°
Rotation: 360° P/L
VESA: MIS-D
Includes 200 wall mount pivot, wall mount bracket, 2 extensions, VESA mounting screws
If mounting a laptop, also order the LX Notebook Tray (50-193-200)
Weight Capacity: 25 lbs (11.3 kg)
Monitor depth greater than 3" (7.5 cm) may diminish capacity
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Extends up to 23.8" (60.5 cm) from the wall and retracts to within 5.8" (14.8 cm), excluding depth of monitor
Durable, easy-to-clean powder-coated painted steel exterior
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud
Specifications: Recommended Use: LCD display / keyboard / mouse / CPU
Recommended Display Size: 30"
Flat Panel Mount Interface: 100 x 100 mm, 75 x 75 mm, 200 x 200 mm, 400 x 200 mm
Max Load Weight 28 lbs
Color: Gray, black
Adjustable height, rotating, tilt, locking casters, cable box
Specifications: Weight Capacity: display = 6-18 lbs (2.7-8.2 kg), worksurface = 10 lbs (4.5 kg), keyboard, mouse and barcode scanner = 4 lbs (1.8 kg), CPU = 50 lbs (22.7 kg)
Lift Range: LCD and keyboard adjusts 20" (51 cm) in tandem with single-motion, LCD adjusts 5" (13 cm) independently, maximum LCD height adjustment = 25" (64 cm)
Monitor up/down tilt: +25 degree /-5 degree
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Worksurface: 22.75"W x 10.6"D (57.8 x 26.9 cm)
Keyboard tray: 18.6"W x 9"D (47.2 x 22.8 cm)
Back-tilt keyboard tray adjustable: 0 degree to -10 degree
CPU Size Range: 1-3/8" to 3-3/4" (35 to 95 mm) wide, accommodates most small form factor and ultra small form factor CPUs
Product Weight: 39.6 lbs (18 kg)
Features: For Computer Users
- Improve your energy and productivity by standing or sitting as you work, and then switch positions whenever you choose. This work style encourages healthy movement throughout the day
- Counterbalanced adjustment points allow instantaneous, tool-free re-positioning while you work!
- Promote fitness and comfort as you compute, reducing potential
Dimensions (H x W x D): Worksurface Dimensions: 0.25" x 23.00" x 15.00"
Keyboard Tray Dimensions: 0.25" x 27.00" x 9.00"
Specifications: Internal Dimensions: 2.5"H x 12"W x 10.5"D (63.5 x 305 x 267 mm)—includes dividers to configure up to 16 compartments
The primary drawer must be the first drawer attached to the cart. This supplemental drawer attaches to the underside of the primary or other supplemental drawer
Drawer features key-lock access
This drawer is manually operated. It does not interface with a cart’s electrical or auto-locking drawer systems
Purchase travel-stop accessory separately based on the number of drawer rows on cart: pt # 97-873 for 3 rows; pt # 97-874 for 4 or 5 rows
Shipping Dimensions: 18" x 18" x 6.5" (457 x 457 x 165 mm)
Shipping Weight: 9 lbs (4 kg)
Warranty: Five (5) years
Package Contents: Includes drawer assembly, large drawer, dividers
Specifications: Includes handle, basket, mounting hardware
Internal dimensions of basket: 5.875"H x 13.25"W x 3.125"D (149 x 337 x 79 mm)
Durable plastic and metal design
Designed for the StyleView EMR Laptop Cart, SV40. Also compatible with other StyleView 41/42-Series EMR Carts, which come standard with this basket and handle
Attaches to rear of cart using a single t-slot channel bracket
Weight Capacity: 5 lbs (2.3 kg)
Specifications: LCD Size: <= 22"
Weight Capacity: 13 lbs (5.9 kg) per mount, 26 lbs (11.8 kg) total. Note: Monitors must be equal in weight or ±1 pound (.45 kg)
Monitor depth greater than 3" (7.5 cm) may diminish capacity
Install display mounts on the bow at +2.5° or -2.5° angle to optimize viewing conditions
Monitors are installed with 8° inward off-set angle, creating a 16° viewing parabola for better sight lines
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Durable, easy-to-clean powder-coated painted steel exterior
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud
Includes wall mount bracket, 2 extensions, crossbar and 2 sliding LCD mounts, VESA mounting screws
Specifications: Description: WM Low Profile Wall Mount (silver)
LCD Size: 32" – 65"
Capacity: <= 175 lbs (<= 79 kg)
VESA: MIS-D/E/F
Includes wall plate, two (2) display brackets, hardware fastner kit
Universal Display Attachment: Mounting holes must fit within spacing range below
Horizontal = 100 mm (min.) to 600 mm (max.)
Vertical = 100 mm (min.) to 450 mm (max.)
For displays with horizontal hole pattern of 601–800 mm, order WM, XL version (pt. # 60-602-003)
Mounting Options: Wall plate attaches to vertical wall surfaces. Includes hardware for mounting to wood studs (16" centered studs) or concrete walls
If mounting to wall using 24" centered studs, order WM, XL version (pt. # 60-602-003)
Premium Construction: Composed of extruded aluminum and steel
Profile off the wall = 1.25" (32 mm)
UL certified and listed to ...
Specification: Includes wall and display brackets, quick-release VESA-CPU mount/power brick bracket, hardware fastener kit
Ideal for 32" and larger displays up to 105 lbs (47.6 kg). Total weight capacity is 115 lbs (52.2 kg): 105 lbs (47.6 kg) for display, 7 lbs (3.2 kg) for CPU, 3 lbs (1.4 kg) for cables and power brick
Tilt: Smooth continuous display tilt range from 0° to 15° forward; Tilt range may be restricted when displays are in portrait mode
Easily rotate display to either a portrait or landscape orientation without removing the display
Mounting Hole Patterns: Horizontal measurement = 200 mm, 300 mm, 400 mm, 440 mm, 500 mm or 600 mm. Vertical measurement = 200 mm or 225 mm-400 mm. With optional 800 mm Accessory Kit (97-489, ordered separately), horizontal measurement can be expanded to 800 mm or 660 mm
Portrait or landscape orientation may be dependant on cont...
Specifications: Display size is dependent on overall configuration of the DS100 Stand; observe balance requirements to prevent tipping
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Attaches to DS100 Pole only; cannot attach to DS100 Crossbar