Specifications: Direct Connection (No Bridge Necessary): Individually switch on/off three devices via app or Siri, set schedules, protect electronics
With Home Hub (Apple TV or HomePod): Control while away from home, automate
Works great in scenes & automations with: Eve Motion, Eve Door & Window, Eve Room, Eve Light Strip, Eve Flare, Eve Light Switch
Power Source: AC 120V, 60 Hz, max. 15A / 1,800W
Wireless Connection: Wi-Fi
Requirements: iPhone, iPad, or iPod touch with iOS 12.1 or later
Package Contents: Eve Energy Strip
Quick Start Guide
Specifications: Voltage: 100VAC +/- 10%
Frequency: 60Hz
Max. load: 12 Amps; 1440 Watts (for incandescent loads)
Min. load: None
Load types: Standard appliances up to 12 Amps and incandescent lights up to 1440 Watts
User replaceable fuse: None
Retain all settings without power: Yes, saved in non-volatile EEPROM
Standby power consumption: <1W
Dimensions: 2.75"W x 4.32"H x 1.27"D (with 6" lead)
Specifications: On-Levels: 32 locally, increments of 1% with software
Ramp Rates: 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely
LED Indicator: 9 White LEDs, one Red/Green Status LED
Operation Modes: INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order: INSTEON, INSTEON cleanup, X10
Multi-Way Circuit Support: One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other INSTEON Controllers
Setup Memory: Non-volatile EEPROM
Paddle Type: True rocker action
Wire Nuts: 4 included
Voltage: 100VAC to 277VAC
Frequency: 50/60Hz auto-detected at power-up
Neutral Wire: Required
Maximum Amps: 5 amps
Ground Lead: 6", 18 AWG, stranded, bare copper
Maximum Load: 600 Watts (uses 12-Amp triac ...