Specifications: Standard: IEEE 802.3/3u/3ab, IEEE 802.3af Power over Ethernet
1 x 10/100/1000Mbps DATA-IN (Data only)
1 x 10/100/1000Mbps PWR+DATA OUT (Data + Power)
Network Media:
10Mbps: UTP/STP Cat. 5 and 5e up to 100 Meters
100Mbps: UTP/STP Cat. 5, and 5e up to 100 Meters
Gigabit: UTP/STP Cat 5e and 6 up to 100 meters
Data Lines:
Pair 1: Pin 1, 2
Pair 2: Pin 3, 6
Power:
Input: 100~240V, 50~60Hz, 0.4A max.
Output: 48V DC, 0.4A 18W max.
Power Consumption: 15.4 Watts (max.)
Dimensions (W x D x H): 70 x 45 x 25mm (2.75 x 1.8 x 1 in.)
Weight: 45 g (1.6 oz.)
Specifications: Standards:
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3af
Device Interface:
1 x Gigabit data/power in port
1 x Gigabit data out port
1 x Power out port
LED indicators
Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V)
Data Transfer Rate:
Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)
Jumper Cable:
2.0 to 2.0 mm
2.0 to 2.5 mm
Power:
PoE network cable input: 48 V DC, 0.38 A
Output: 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A)
Consumption: 0.3 Watts (max.)
Specifications: Number of Ports: 2 (1 for data in, 1 for data and power out)
Pass-through Data Rates: 10/100/1000 Mbps
Maximum Cable Run: 100 meters or 330 feet which corresponds to Ethernet limits
LED Indicator: Power On/Off and overload conditions
Connectors: Shielded RJ-45, EIA 568A and 568B
MTBF: 100,000 hrs. at 25 ºC
Power over Ethernet Output:
Pin Assignment and Polarity: 4/5 (+), 7/8 (–)
Output Power Voltage: 50V DC
Output Power: 15.4 Watts
Input Power Requirements
AC Input Voltage: 90 to 264V AC
AC Input Current: 0.5A at 100 - 240V AC
AC Frequency: 47 - 63 Hz
Operating Ambient Temperature: 32 - 104ºF (0 - 40ºC)
Storage Temperature: -4 - 158ºF (-20 - 70ºC)
Operating Humidity: Maximum 90%, non-condensing
Storage Humidity: Maximum 95%, non-condensing
Operating Altitude: -1000 - 10,000 ft. (-304.8 - 3048 m)
Heat Dissipation: ...