Specifications: Description: DS100 Crossbar Extender, Long (black)
Includes: Long Extenders, Center Display Bracket, Attachment hardware
Display: Maximum physical outside width of display = 24.5" (62 cm). This is slightly more than typical display with a 26" screen.
Weight Capacity: 31 lbs (14 kg) per monitor
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Specifications: Weight Capacity:
Display = 6 - 18 lbs. (2.7 - 8.2kg) or up to 25 lbs (11.4kg) with tilt and lift lock-out features engaged
keyboard, mouse and barcode scanner = 4 lbs (1.8kg)
CPU = 50 lbs (22.7kg)
Lift: 25" (64cm)
Tilt: Up +25 degree/ Down -5 degree
Mounting Pattern: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Pan: 360 degree
Rotation: 360 degree
Keyboard Tray Dimensions: 18.6" x 9" (47.2 x 22.8cm)
CPU Dimension: 1-3/8" to 3-3/4" (35 to 95mm) wide; accommodates most small form factor and ultra small form factor CPUs
Monitor Size: Up to 24"
Specifications: Includes fully assembled arm, two-piece desk clamp, mounting hardware
Can be configured to hold a laptop instead of an LCD display; also order the accessory Notebook Tray (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Arm folds back over the base into a compact retracted position; perfect for tucking under systems furniture storage shelves or cabinets in space constrained areas
Mounting Options: Desk Clamp attaches to surface edge .47" to 1.25" (12 to 32 mm) thick
An accessory Grommet Mount is available to install arm to desk via a through-hole in its surface: order 98-110
Desk clamp has anti-rotation screws to prevent base from slipping
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x...
Specifications: Mounting Components:
CPU holder, mounting hardware, large lower drawer, camera shelf, travel stop
Recommended Use: LCD display / CPU / camera
Flat Panel Mount Interface: 100 x 100 mm, 75 x 75 mm
Recommended Display Size: Up to 22"
Tilt: Yes
Pan: 24°
Max Load Weight: 17.7 kg
Compatibility: P/N: SV43-1310-0, SV44-1311-1, SV44-1311-2, SV44-1311-3, SV44-1311-7, SV44-1312-1, SV44-1312-2, SV44-1312-3
Specifications: Max Weight per mount (lbs): 26.5
Mounting Hole Pattern (mm): 75 x 75; 100 x 100
Screen rotation (portrait/landscape): 360°
Tilt/Pan adjustment: Ball joint mechanism allows 20 degrees display adjustment in any direction from the vertical plane
Pole height (inches): 18.7
Cable management: Internal / Integrated
Mounting options: Freestanding
Pole diameter: 1.6
Foot print (inches): 16.6 x 12
Color: Silver with black donuts
Specifications: Typical Applications:
Install an LCD display in an open frame or floor rack to monitor essential server-room or console information
Mount a touch-screen display for instant on-site operation and control of rack equipment
System Requirements: LCD display with 75 x 75 mm, 100 x 100 mm or 100 x 150 mm VESA plate
Specifications: Device Type: Monitors
Display Diagonal: 23 in
Durable Screen Protection: Yes
Filter Dimensions (width x height): 20 1/16 in x 11 5/16 in
Filter Dimensions - Metric (width x height): 510 mm x 287 mm
Filter Type: Frameless
For Device with Raised Bezel: Yes
Orientation: Landscape
Overall Height (Imperial): 11.3 in
Overall Height (Metric): 287 mm
Overall Width (Imperial): 20.1 in
Overall Width (Metric): 510 mm
Privacy: No
Reduces Glare: Yes
Reversible: No
Scratch Resistant: Yes
Screen Attachment: Attachment Strips and Slide Mount Tabs
Screen Format: Widescreen
Touch Compatibility: Yes
Specifications: You will see the information on your display while people on either side see a darkened screen
Designed to fit 14.0" screens that extend edge to edge. Filter fits diagonally measured 14.0" viewing screen and a 16:9 aspect ratio.
3M's thinnest privacy filter maintains the display's touch functionality
Optimized viewing experience for high
Specifications: Weight Capacity: Total load on height-adjustment assembly = 50 lbs (22 kg). Includes contents of Worksurface, Cable Storage Box and LCD Pivots. LCD Pivot capacity = 6–14 lbs (2.7–6.4 kg) per display, 12–28 lbs (5.4–12.7 kg) for both displays
Mounting Standards: VESA FDMI, MIS-D, 75/100 (hole patterns = 100 x 100 mm and 75 x 75 mm)
Displays can be mounted on cart in 5 different height positions
Install displays at 3.5° or 8.5° upward angle for optimized viewing conditions. Displays are not tilt adjustable
CPUs attach safely to rear of cart with CPU Holder: Adjusts from 12"H x 3"D to 18"H x 8.5"D (30 x 8 cm to 46 x 22 cm)
CPU Holder capacity: 40 lbs (18 kg)
Cable Storage Box and space within the center column can conceal and route cords, wiring and power bricks
Barcode scanner holder provides easy access to ...
Specifications: Weight Capacity: individual LCD weight = 7 to 20 lbs (3.2 to 9.1 kg)
Screen = 24"
Lift: 13"
Tilt: 75°
Pan: 360°
Rotation: 360°
Vesa: MIS-D
Includes two (2) LCD arms and extensions, pole, desk clamp
Can be configured to hold a laptop instead of an LCD display; also order the Notebook Tray accessory (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Desk clamp attaches to edge up to 2.6" (66 mm) thick
A separately ordered grommet mount accessory (98-035) is available to attach the arm through a hole in the desktop
This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissi...
Specifications: Supports two displays between 15.00" - 24.00" with maximum weight 26.00 lbs. per display
Flexibility to tilt up and down +/- 20 degree
Swivel displays side to side +/- 20 degree
Rotate 90 degree for landscape or portrait mode
Hole pitch 100 mm x 100 mm VESA and 75.00 mm x 75.00 mm VESA