Specifications: Toolless, vertical cable management accessory that allows for quick installation and takes up zero U of space within the rack. It helps to eliminate cable stress and organize the cable layout within the rear channels of the NetShelter enclosure.
Specifications: Output
Maximum Total Current Draw per Phase: 10A
Output Connections: (1) IEC 320 C13 IEC 320 C13
Cord Length: 0.61 meters
Input
Input Connections: IEC-320 C14
Cord Length: 0.61 meters
Number of Power Cords: 6
Maximum Line Current per phase: 10A
Maximum Input Current per phase: 10A
Specifications: Output
Output Connections: (1) IEC 309 16A (2P+E)
Input
Input Connections: IEC-320 C20
Cord Length: 2.5 meters
Maximum Line Current per phase: 16A
Maximum Input Current per phase: 16A
Specifications: Output
Maximum Total Current Draw per Phase: 16A
Output Connections: (1) IEC 320 C19
Input
Input Connections: IEC 309 16A 2P+E
Cord Length: 3 meters
Maximum Line Current per phase: 16A
Maximum Input Current per phase: 16A
Specifications: Temperature readings: Fahrenheit, Celsius
Temperature accuracy: 14°F to 158°F +/- 0.9°F; -10°C to 70°C +/- 0.5°C
Humidity accuracy: 10-90 RH ± 2%
Voltage: 12V (from RMCARD)
Input dry contact: 4
Connection port & cable: RJ45 Ethernet port x 2, 10 ft. cable, Daisy Chain x 8 Max
Compatibility: Tripp Lite UPS system with compatible accessory slot (please verify compatibility with your UPS before ordering)
Ethernet network with TCP/IP protocol (ports 3664 and 3665 must be open on your firewall)
SNMP-based network management software, web browser (Chrome, Firefox or Safari) and/or VT-100 Telnet and/or SSH client
Package Contents: WEBCARDLXMINI Web Management Accessory Card
USB Micro-B to USB-A cable
Faceplates
Owner's manual
Specifications: Enables remote UPS management from virtually anywhere in the world
Sends user-configurable alerts via SNMP or email
Allows mass configuration and updating of multiple units using TLNET Configurator utility
Logs power events, alerts and electrical data
Web interface does not require the Java Runtime Environment
Weight: 0.51 lb.
Package Contents: TLNETCARD Web Management Accessory Card
Configuration cable (7315E1)
3 x Faceplates
Owner's Manual
Specifications: OUTPUT
Overload protection: 50A DC output fuse
INPUT
Input cord length: 36.00", 8 AWG, 3 conductor
BATTERY
Expandable battery runtime: Includes a second input/output connector to daisy-chain multiple battery packs
DC system voltage: 192V DC
Connects to UPS via: Detachable cable with UPS specific DC connector (90 cm length, 8 gauge)
Compatibility: CyberPower Systems Smart App Sinewave UPS Systems
CyberPower Systems Smart App Intelligent LCD/AVR UPS Systems* (CPS1500AVR UPS system is NOT supported)
CyberPower Systems Automatic Transfer Switch (ATS) Power Distribution Units (PDU)
Please see RMCARD Compatibility Chart in the Resources section for details
Note: *UPS systems manufactured in or before 2010 may have a ribbon cable coming out of the RMCARD port and are not compatible with the RMCARD205.
Specifications: System Requirements:
An Ethernet network connection
Web Browser
Network Management System (NMS) compliant with SNMPv1/v3 (optional)
Compatibility: UPS Systems -OMNIVS1500XL,OMNIVSINT1500XL, SU750XL, SU750RTXL2U, SU1000XLa, SU1000RTXL2Ua, SMART750RMXL2U, and other Tripp Lite UPS systems that specify the use of this battery pack.