Specifications: Included in Package: Black leather holder
Instruction Manual
Remote Cable Tester
LED Indicators: Battery condition
Center conductor
Conductor indicators
Connected or 25 Ohm detected
No cable / No terminator
Non-parallel or 50 Ohm detected
Shielding
Short circuit detected
Product Height: 25 mm [1 in]
Product Length: 180 mm [7.1 in]
Product Weight: 250 g [8.8 oz]
Product Width: 110 mm [4.3 in]
Shipping (Package) Weight: 0.4 kg [0.9 lb]
Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency:
1000 Hz nominal
Alternating Frequency:
1000/1500 Hz nominal
Over Voltage Protection:
60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode:
8 dbm into 600 ohms
Output Voltage Level in Continuity Mode:
8 Vdc with fresh battery
Battery:
9V alkaline
Temperature:
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions:
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...
Specifications: Test Services:
Graphical wiremap, length, cable ID, and distance to fault displayed on one screen.
Tests all common media types including RJ11, RJ45, Coax, with no need for adapters.
Locates virtually any cable or wire pair with IntelliTone digital and analog toning.
Verifies today's media services, including 10/100/1000 Ethernet, POTS, and PoE.
Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs.
Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet.
Length Measurement: 11.81" to 1509 ft
Ports: RJ-45 10/100/1000Base-T Network
Connectivity Media: UTP
Display Screen: Monochrome LCD with backlight
Batteries: AA Standard
Dimensions: 3.00" x 6.40" x 1.40"
Weight (Approximate): 12.80 oz
Specifications: Test Services:
Detects IntelliTone digital signal and 1 kHz signal from analog toners.
Features a CABLEMAP capability that identifies common cable miswires such as opens, shorts, and reversed pairs in twisted pair cabling.
Ports: 1 x RJ-45 10/100Base-TX Network
Connectivity Media:
Twisted Pair
Coaxial
10/100Base-TX
Status Indicators:
8 LED indicators
1 Synch LED indicator
Batteries: Alkaline Battery
Battery Life: 20 Hour Typical
Input Voltage: 9 V DC Battery
Temperature:
32°F (0°C) to 104°F (40°C) Operating
-4°F (-20°C) to 140°F (60°C) Storage
Dimensions: 8.73" x 1.88" x 1.26"
Package Contents:
IntelliTone 200 Probe
RJ-11 and RJ-45 patch cables
Lanyard
Owners CD
Quick start guide
9 volt battery
Additional Information: POTS telecom service available
Altitude: 3000 m
Operating Relative Humidity:
95 % (50 °F to 95 °F ; 10 °C to 35 °C)
75 % (95...