Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 1.64ft LED numbers: 30 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
Input Voltage: +5V
Current (Single strip): Max. 1.14A
Wattage (Single strip): Max. 5.7W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 38 LEDs (550mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 550 x 13 x 5.5mm (21.7 x 0.5 x 0.2in)
Scope of Delivery:
1 x 550mm (21.7in) PHANTEKS NEON Digital-RGB LED Strip
1 x 600mm (23.6in) M/B Digital-RGB adapter/Extension
3 x 90 degree mount
3 x 180 de...
Specifications: Material 12 pcs addressable RGB LED with magnetic strip and adhesive tape
Pin definition:
+5V, D, G*
+5V, D, NP, G*
Included Parts:
2 x Addressable RGB LED strip
1 x Motherboard connect cable**
1 x Splitter cable
Length: 300mm
Wattage: 3W (5V, 0.6A)
Tandem limits: Depend on controller
Remark:
* Please check the control box and motherboard pin header that you want to connect are the same as LS03’s pin definition.
** Included Motherboard connect cable supports SilverStone’s addressable RGB 3pin connectors and other market standard addressable RGB 3pin (three pin in four pin housing) connectors.
Specifications: Material: 18 pcs 5050 RGB LED with magnetic strip and adhesive tape
Pin definition: +12V, G, R, B
Included Parts:
RGB LED strip x 2
Y cable x 2
Length: 300mm
Wattage: 1.44W (12V, 0.12A)
Tandem limits: 5 pcs on each line
Weight: 30g
Specifications: Included Accessories: 1 x 300 mm Extension cable, 1 x 100 mm Extension cable
LED Strip Length: 300 mm, 10-LED
LED Strip Width: 10mm
LED Color: Color Changing RGB
Mounting: 3M Double sided tape & Magnets
Cable Finish: Black rubber
System Requirements: Requires HUE+ Advanced PC Lighting device to operate. Sold Separately
Specifications: The PWM ARGB hub is equipped with two connecting cables. 1.3FT Motherborad PWM RPM feedback cable include 2FT Motherboard 3pin ARGB cable include With wireless IR remote control for any 5V ARGB devices.No motherboard ARGB supporting is nneded Make sure remote using distance less than 6.6FT
Specifications: Addressable RGB Splitter Hub This splitter hub connects to the 3-pin 5V addressable RGB header or controller on your motherboard, allowing you to add 10 ARGB fans or strips for lighting synchronization via motherboard software. It is compatible with ASUS AURA SYNC, GIGABYTE RGB Fusion, MSI Mystic Light and ASRock RGB LED. An extra Molex power interface ensures stable power delivery for all the ARGB devices. Built-in PMMA case offers solid protection while the included sticky pad makes installation quick and easy. A 1ft RGB extension cable is also included for your convenience.
Specifications: Wireless IR remote control Power - Ture On/Shut Down Speed - effect speed Accelerate/Decelerate Brightness - Increase/reduce brightness Mode Selection - click for small mode selection / 2 second long press for large mode selection Automatic Cycle Mode - Autoplay all RGB effect, 10 senconds each mode Single Color Selection - White / Red / Green / Blue single color set up 3 bottons manual control Mode switch button -switch between 6 lighting effects Speed switch button - 6 speed range cycle switching Color switch button - adjust your LED lights color and brightness levels