"host bus adapter"

• Type: USB to SATA
• Color: Black
• Cable Length: 2.5"
• Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male Bus Type: USB 3.1 Gen 2 Chipset ID: ASMedia - ASM1351 Compatible Drive Types (Type and Rate): SATA Drive Size: 2.5in Interface: USB 3.1 Gen 2 Number of 2.5 inch bays: 1 Number of Drives: 1 Hot Swap Capability: Yes Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM Maximum Data Transfer Rate : 10 Gbps Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s UASP Support: Yes
• Model #: USB312SAT3CB

Limited time offer, ends 04/27

• Type: PCI Express Controller Card
• Compatibility: PCI-e 8x (or above).
• Specifications: Bus Type: PCI Express. Card Type: Standard/Low Profile. Chipset ID:ASMedia – ASM2812. Compatible Drive Types: NVMe SSD (PCIe, M-Key). Drive Installation: Fixed. Interface: PCI Express x8 (compatible with x8 or x16). Number of Drives: 2. Bootable: Yes. Hot Swap Capability: No. Type and Rate: PCI Express 3.0 (8Gbps). Drive Connectors: 2 – M.2 (PCIe, M-Key, NVMe, NGFF). Host Connectors: 1 – PCI Express x8 Male. OS Compatibility: OS independent; No software or drives required. Special Notes / Requirements: System and Cable Requirements PCI Express enabled. Computer with an available PCI Express: x8 or x16 slot. Environmental Humidity: 20~80% RH. Operating Temperature: 5°C to 50°C (41°F to 122°F). Storage Temperature: -25°C to 70°C (-13°F to 158°F). Demensions: 120x195x22...
• Model #: 2NV-PCE8X

• Type: PCI Express to USB Card
• External USB Ports: USB Type-C (24 pin, Gen 2x2, 20Gbps)
• Standard: USB 3.2 Specification Rev. 1.0 PCI Express Base Specification Rev. 3.0 Intel xHCI Specification Rev. 1.1 UASP (USB Attached SCSI Protocol) Rev. 1.0
• Data Transfer Rate: 20Gbps
• Model #: PEXUSB321C

Limited time offer, ends 04/30

• Specifications: Host Computer Connector: USB 3.0 Type-A Male Network Connector: RJ45 8P/8C Female Power: USB Bus-powered OS Compatibility: Chrome, Mac, Windows Rating: USB 3.0 data transfer rate up to 5 Gbps Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab (10BASE-T, 100BASE-TX, 1000BASE-T networks)
• Option: 1 pack
• Color: Black
• Model #: U3GIGABIT

Limited time offer, ends 04/30

• Type: SAS
• Color: Blue
• Connector Number: 5
• Connector Detail: SFF-8087 to 4 X SATA
• Model #: 12-001-002

• AC Adapter: Yes
• Material: Steel and Plastic
• Dimensions: 5.50" x 4.80" x 2.80"
• Specifications: Bus Type: USB 3.0 Chipset ID: Xilinx - Spartan-6 Compatible Drive Types: SATA Drive Installation: Removable Drive Size: 2.5in & 3.5in Interface: USB 3.0 Number of Drives: 1 4Kn Support: Yes Erase Modes: Quick Erase 1-Pass Overwrite (NIST SP 800-88 Rev 1 - Clear) 3-Pass Overwrite 7-Pass Overwrite Custom Erase Secure Erase (NIST SP 800-88 Rev 1 - Purge) Enhanced Secure Erase (NIST SP 800-88 Rev 1 - Purge) Hot Swap Capability: Yes Max Drive Capacity: Currently tested with up to 10TB 7200 RPM Maximum Data Transfer Rate: 3Gbps MTBF: 8640 Hours Port Multiplier: No S.M.A.R.T. Support: Yes Type and Rate: USB 3.0 - 5 Gbit/s, SATA III (6 Gbps)
• Model #: SDOCK1EU3P2

Limited time offer, ends 04/30

• Type: SAS
• Color: Blue
• Connector Number: 5
• Specifications: --Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. --INTERNAL MINI SAS DATA CABLE connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives; Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector --LEVERAGE HARDWARE RAID PERFORMANCE with this SATA multi-lane cable; Connect up to 4 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters; Supports up to 6Gbs data transfer rate per drive --FLEXIBLE DESIGN of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain re...
• Model #: 12-001-003

Limited time offer, ends 04/30

• Type: SAS
• Color: Blue
• Connector Number: 5
• Connector Detail: SFF-8087 Male to 4 X SATA
• Model #: 12-001-001

• Color: Black
• Specifications: 4K Support: Yes Fast-Charge Port(s): Yes Displays Supported: 1 Power Delivery: 60W Bus Type: USB-C USB 3.0 Chipset ID: DisplayLink - DL-6950 Genesys Logic - GL850G Texas Instruments - TPS65982 Parade Technologies - PS176 VIA Labs - VL813 Realtek - RTL8153 3 - Connector Type(s): HDMI (19 pin) USB Type-A (9 pin, 5 Gbps) 1 - Connector Type(s): USB 3.0 A (Fast-Charge, 9 pin) RJ-45 USB Type-C (24 pin, 5Gbps) USB Type-B (9 pin) USB 3.0 2 - Connector Type(s): 3.5 mm Mini-Jack (3 Position) Maximum Data Transfer Rate: 5 Gbps (USB 3.0) 2 Gbps (Ethernet; Full-Duplex) Maximum Digital Resolutions: 3840 x 2160p (4K) @ 30Hz Type and Rate: USB 3.0 - 5 Gbit/s UASP Support: Yes Compatible Networks: 10/100/1000 Mbps Auto MDIX: Yes Full Duplex Support: Yes
• Dimensions: 4.50" x 3.90" x 5.70"
• Weight: 2.40 lbs.
• Model #: KITBZDOCK

Limited time offer, ends 04/27

• Type: PCI Express to USB Card
• External USB Ports: 2x USB Ports
• Internal Ports: 1 x SATA
• Standard: USB 3.0
• Model #: SY-PEX20124

• Type: Fibre Channel Host Bus Adapter
• Specifications: Host Interface: PCI Express 2.0 x8 Form Factor: Plug-in Card Ports/Channels: 2 x Fibre Channel Data Transfer Rate: 10 Gbps Fibre Channel
• Model #: 81Y1650

• Type: Fibre Channel Host Bus Adapter
• Specifications: Ports/Channels: 2 x Fibre Channel Host Interface: PCI-X 266 MHz Backward Compatibility: PCI-X 2.0 Connectivity Media: Fiber Data Transfer Rate: 4 Gbps Fibre Channel
• Model #: 26R0890

• Type: USB-C to eSATA Cable
• Connector Number: 2
• Connector Detail: Drive Connectors: 1 x eSATA (7 pin, Data) Male Host Connectors: 1 x USB Type-C (24 pin) USB 3.0 Male
• Terminal Gender: Male to Male
• Model #: USB3C2ESAT3

• Type: PCI Express to USB Card
• External USB Ports: 2 x USB 3.2 USB Type-A (9 pin, Gen 2, 10 Gbps)
• Internal Ports: 1 x SATA Power (15 pin)
• Standard: USB 3.2 Specification PCI Express Base Specification Rev. 3.0 Intel xHCI Specification Rev. 1.1 UASP (USB Attached SCSI Protocol) Rev. 1.0
• Model #: PEXUSB312A3

OUT OF STOCK

• Type: U.2 to PCIe Adapter - x4 PCIe
• Specifications: Bus Type: PCI Express Compatible Drive Types: U.2 (SFF-8639, x4 PCIe, NVMe) Drive Installation: Fixed Drive Size: 2.5in Interface : PCI Express Number of Drives: 1 Supported Drive Height(s): 15mm 12.5mm 9.5mm 7mm 5mm
• Dimensions: 0.90" x 6.50" x 4.80"
• Weight: 0.14 lbs.
• Model #: PEX4SFF8639

OUT OF STOCK

• Type: SATA III
• Type: Others
• Color: Black
• Length: 3 ft.
• Model #: USB3S2ESATA3

OUT OF STOCK

• Changer Type: Bus Type: PCI Express Card Type: Standard Profile (LP bracket incl.)
• Specifications: Industry Standards: Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps) PCI Express 2.0 Type and Rate: SATA III (6 Gbps) OS Compatibility: OS Independent; No additional drivers or software required System and Cable Requirements: PCI Express x4 slot (backward compatible with x8, and x16 slots) Humidity: 20% - 80% RH (Non-condensing) Operating Temp.: 5 to 50 degree C Storage Temp.: -25 to 70 degree C
• Connector A: Connector: 1 x PCI Express x4 Male
• Connector B: Internal Ports: 2 x M.2 (NGFF, B-Key) Receptacle 1 x SP4 (4 pin; Small Drive Power) Male
• Model #: PEX2M2D