Features: Produces up to 26 lbs of ice in 24 hours
Takes only 6 minutes to make ice for your urgent cooling needs
Ice basket stores up to 2.65 lbs of ice at a time
Easy to read display panel with indicator lights, so you never have to wonder if you need more water or if the ice is ready
Ice cubes can be made in two sizes to fit in a variety of containers
Removable ice basket and ice shovel included
Features: Produces up to 26 lbs. of ice in 24 hours
Takes only 6 minutes to make ice for your urgent cooling needs
Ice Basket stores up to 2.65 lbs. of ice at a time
Easy to read display panel with Indicator Lights, so you never have to wonder if you need more water or if the ice is ready
Removable ice basket and ice shovel included
Exterior Drain plug on the bottom for easy emptying and cleaning
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.
These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating.
These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc.
Installation Instructions:
-Make sure the chip modules are free from dirt and gre...
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.
Just peel and stick.
Reduce the risk of hardware failure due to overheating.
Installation Instructions:
Make sure the chip modules are free from dirt and grease.
Peel the protective liner off on the base of the heatsink.
Apply the heatsinks to the corresponding chip modules and apply firm pressure.
Package Includes:
1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset
1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
Dimensions: 1x 14mmx14mmx7.5mm CPU chipset
1x 8.8mmx8.8mmx5mm LAN chipset
Features: Produces up to 26 lbs of ice in 24 hours
Takes only 6 minutes to make ice for your urgent cooling needs
Ice basket stores up to 2.65 lbs of ice at a time
Easy to read display panel with indicator lights, so you never have to wonder if you need more water or if the ice is ready
Ice cubes can be made in two sizes to fit in a variety of containers
Removable ice basket and ice shovel included