3PCS Human Micro-Motion Detection mmWave Sensor, Compatible with Raspberry Pi/Pi Pico/Jetson Nano/ESP32, 24GHz mmWave Radar, Frequency Modulated Continuous Wave (FMCW) Technology,UART & GPIO Output

Overview The HMMD-mmWave-Sensor is a human micro-motion sensor, adopts Frequency Modulated Continuous Wave (FMCW) technology to detect and identify moving, standing, and motionless human body. Combining radar signal processing with accurate human detection and ranging algorithms, supports configuring the sensibility for each range independently to improve anti-interference performance. It can be widely used in AIoT scenarios such as Smart Home, Intelligent Security, Smart Business, and Intelligent Lights, etc. Features Based on AIoT mmWave Sensor SoC S3KM1110, onboard high performance 24GHz 1T1R antennas Onboard MCU and built-in human micro-motion sensing algorithm for accurate detecting of moving, micro-motion, and standing human Provides UART communication protocol, supports configuring sensing distance range, sensitivity, and absence report delay, easy to operate Supports UART port and GPIO header output, Compatible with Raspberry Pi / Pi Pico / Jetson Nano / ESP32/ Ar-dui-no.

Wide-range moving human body sensing distance, supports top-mounted and wall-mounted detection Comes with online resources and manual: bit. ly/4e0yvzb

Specifications

1.
Hardware Frequency band: 24~ 24.25GH z
Bandwidth: 0.25GH z
Modulation: FMCW
Power supply: 3.3V
Output interface: UART
& GPIO UART baudrate: 115200bps (default)
Environment temperature: -40~85
Dimension: 20×20mm
2.
System Performance Detection range (wall-mounted): Moving
human target: 10m;
Micro-motion human target: 6m
Detection range (top-mounted): Moving
human target: 5m;
Micro-motion human target: 4m
Detection distance resolution: 0.7 m
Detection angle: ±60°
Detection accuracy: 0.15 m (moving target within 10m radial distance from the radar)
Average operation current: 50mA
Data refresh cycle: 100ms Package Content HMMD-mmWave-Sensor x3