RP2040-Touch-LCD-1.28 Based on Raspberry Pi RP2040 Board with 1.28inch Round Touch LCD, 240x240 Pixels 65K RGB Colors IPS LCD Display, Accelerometer and Gyroscope Sensor Dual-Core Processor

RP2040 Microcontroller Development Board, with 1.28 inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor Overview RP2040-Touch-LCD- 1.28 is a low-cost, tiny size, with onboard 1.28 inch capacitive touch display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly. Features RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 264KB of SRAM, and 4MB of on-board Flash memory Type-C connector, keeps it up to date, easier to use Onboard 1.28 inch capacitive touch display, 240×240 resolution, 65K color Lithium battery recharge/discharge header, suitable for mobile devices USB 1.1 with device and host support Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB Accurate clock and timer on-chip Temperature sensor 6 × GPIO pin via SH 1.0 connector Specification 1)LCD
Parameters Touch Chip: CST816S
Touch Port: I2C
Display Chip: GC9A01A
Display Interface: SPI
Resolution: 240 (H) RGB x 240 (V)
Display Size: 32.4 mm
Display Panel: IPS
Pixel Pitch: 0.135H x 0.135V mm 2)
IMU Parameters Sensor: QMI8658C
Accelerometer:
---Resolution: 16 bits ---Measuring
Range (Optional): ±2, ±4, ±8 ±16g
Gyroscope:
---Resolution: 16 bits ---Measuring
Range (Optional): ±16, ±32, ±64, ±128, ±256, ±512, ±1024, ±2048°/sec Online Development Resources /User
Manual: // bit. ly/3oTVPv2 Package Content RP2040-Touch-LCD- 1.28 x1 SH 1.0 12PIN cable x1