5pcs QF-RD21 5V Power-off Delay Disconnect Relay Module Timer Delay Switch Module

Specifications:

Voltage: 5V DC (±1.5V)

Power consumption: <1.0W

Output: Passive output (ie dry contact), relay set of normally open + normally closed output. Do not exceed 10A at most.

Time range: (4 files, selected by switch)

First gear: range 0.2 seconds-30 seconds, accuracy: 0.1 seconds

Second gear: range 0.2 seconds - 300 seconds (5 minutes), accuracy: 0.3 seconds

Third gear: range 0.2 seconds-30 minutes, accuracy: 1.8 seconds

Four gears: range 0.2 seconds - 300 minutes (5 hours), accuracy: 18 seconds

Input: Voltage signal, above 1.5V is the effective signal, the current needs at least 0.1mA.

Dimensions: length 70mm * width 25mm * height 20mm

Screw hole: center distance 64.5, aperture 3.0mm

Wiring:

V+ module DC powered positive

GND The DC supply of the module is also the reference GND of the signal voltage.

IN signal voltage input, low level below 1V, high level above 1.5V, uncertain in the middle. Up to 30V

Normally open contact of the NO relay

Constant contact of NC relay

COM relay contact common

Instructions:

Time range setting:

- When the selector switch is placed in the 30 position, it means 0-30 adjustable

- When the selector switch is placed at position 300, it indicates that 0-300 is adjustable.

Adjustment of time value:

- Adjustable resistance rotates counterclockwise to the direction of the number to reduce the time, clockwise to the + direction increases the time

Time unit setting:

- When the selector switch is placed in the Sec position, the unit is: second

- When the selector switch is placed in the Min position, the unit is: minute

Example:

Request a delay of 50 minutes:

1. The range is placed at 300 position