Your Browsing History
Meet Your Seller
MAX7219 Dot Matrix Module 4 in 1 Display Module Blue Red Green Three Colors with 5Pin Wire Suitable for Microcontroller (Red)
- It includes an on-chip B-type BCD encoder, multi-channel scan loop, segment word driver, and an 8x8 static RAM to store each data. Only one external register is used to set the segment current of each LED.; A convenient four-wire serial interface can be connected to all common microprocessors. Each data can be addressed without any need to overwrite all displays when updating. The MAX7219 also allows the user to choose whether to encode or not encode each data.; The entire device includes a 150A low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display 1-8 bits of data, and a detection mode that allows all LEDs to illuminate.; There are three colors: red, blue, and green
+
+
Overview
Specs
Reviews
Module parameters: 1. A single module can drive an 8x8 common cathode matrix
2.
Module working voltage: 5V
3.
Module size: length 12.8 cm X width 3.2 cm X height 1.3 cm
4. With 16 fixing screw holes, aperture 3mm
5. Module with input and output interface, support multiple module cascade
6.
Color: red, green, blue
Wiring instructions:
1. The left side of the module is the input port, and the right side is the output port.
2. When controlling a single module, you only need to connect the input port to the CPU.
3. When multiple modules are cascaded, the input of the first module is connected to the CPU, the output is connected to the input of the second module, the output of the second module is connected to the input of the third module, and so on. Take 51
MCU as an example: VCC 5V GND GND DIN P 2.2 CS P 2.1 CLK P 2.0
Package Included: 1pcs NOYITO MAX7219 Dot Matrix Module 4 in 1 Display Module 1pcs 20cm 5P DuPont line
2.
Module working voltage: 5V
3.
Module size: length 12.8 cm X width 3.2 cm X height 1.3 cm
4. With 16 fixing screw holes, aperture 3mm
5. Module with input and output interface, support multiple module cascade
6.
Color: red, green, blue
Wiring instructions:
1. The left side of the module is the input port, and the right side is the output port.
2. When controlling a single module, you only need to connect the input port to the CPU.
3. When multiple modules are cascaded, the input of the first module is connected to the CPU, the output is connected to the input of the second module, the output of the second module is connected to the input of the third module, and so on. Take 51
MCU as an example: VCC 5V GND GND DIN P 2.2 CS P 2.1 CLK P 2.0
Package Included: 1pcs NOYITO MAX7219 Dot Matrix Module 4 in 1 Display Module 1pcs 20cm 5P DuPont line
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 90 days
- This item is covered by Kepler Forge Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...