Your Browsing History
Meet Your Seller
DC to DC Converter Buck Module 12V / 16V (6V to 22V) Buck to 4.2V 2A 3A Max Power Converter IP67 Waterproof with Overcurrent Overheat Short-Circuit Undervoltage Protection
- Input voltage: DC 12V 8V-22V.; Output voltage: DC4.2V ±0.25V.; Output current: 3A Max.This product has been upgraded, from the old version's maximum 2A current output to the new version's maximum 3A current.; Conversion efficiency: about 95%. Shockproof Waterproof level: IP68.; Protection functionOvercurrent protectionOverheat protectionShort circuit protectionUndervoltage protection.; If the module works for a long time it is recommended that the current does not exceed 2A
+
+
Overview
Specs
Reviews
Product Description
1. This product is a fixed ratio buck power converter. To ensure the normal work of the converter, the input voltage must be higher than the output voltage value of 2V or more. If there is no voltage difference of 2V, the output voltage will become lower, but the converter will not be damaged.
2. The chip works in light load mode when no load is applied, and the output voltage may vary within a certain range.
3. The output positive and negative terminals are short-circuited, and the chip starts short-circuit protection.
4. It is recommended to add a suitable fuse to the input when using.
Parameter: Input
voltage: DC 12V 8V-22V.
Output voltage: DC 4.2V ± 0.25V.
Output current: 3A Max.
Output power: 12.6W.
Conversion efficiency: about 95%.
Modular nature: Non-isolated buck power converter.
Protection level: IP67.
Working temperature: -20 ° C - +85 ° C.
Dimensions: 46x27x14mm (please see the second picture on the left).
Weight: about 30g.
Mounting wire length: About 13cm. Protection functionOvercurrent protectionOverheat protectionShort circuit protectionUndervoltage protection.
Wiring instructions:
Input:
Positive: Red wire.
Negative: Black wire.
Output:
Positive: Yellow wire.
Negative: Black wire.
Package Included: 1Pcs NOYITO DC-DC 4.2V 3A Converter Buck Module
1. This product is a fixed ratio buck power converter. To ensure the normal work of the converter, the input voltage must be higher than the output voltage value of 2V or more. If there is no voltage difference of 2V, the output voltage will become lower, but the converter will not be damaged.
2. The chip works in light load mode when no load is applied, and the output voltage may vary within a certain range.
3. The output positive and negative terminals are short-circuited, and the chip starts short-circuit protection.
4. It is recommended to add a suitable fuse to the input when using.
Parameter: Input
voltage: DC 12V 8V-22V.
Output voltage: DC 4.2V ± 0.25V.
Output current: 3A Max.
Output power: 12.6W.
Conversion efficiency: about 95%.
Modular nature: Non-isolated buck power converter.
Protection level: IP67.
Working temperature: -20 ° C - +85 ° C.
Dimensions: 46x27x14mm (please see the second picture on the left).
Weight: about 30g.
Mounting wire length: About 13cm. Protection functionOvercurrent protectionOverheat protectionShort circuit protectionUndervoltage protection.
Wiring instructions:
Input:
Positive: Red wire.
Negative: Black wire.
Output:
Positive: Yellow wire.
Negative: Black wire.
Package Included: 1Pcs NOYITO DC-DC 4.2V 3A Converter Buck Module
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 90 days
- This item is covered by Kepler Forge Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...