Your Browsing History
- Free 15-day Returns
$88.47
Ships from Hong Kong.
Sold by SongFengQiaoMaoYiShangDian
Shipped by SongFengQiaoMaoYiShangDian
Meet Your Seller
USB to LoRa Data Transfer Module Based On SX1262, 850~930MHz Frequency, Suitable for Data Acquisition in Industry and Agriculture, with TCXO Crystal Oscillator
- USB to LoRa Data Transfer Module, SX1262 solution, driver-free, multi-system compatible, supports multiple operating modes, portable and easy to use. Adopts LoRa Modulate and Demodulate technology, anti-interference and long-distance communication.
- This version is 850~930MHz frequency for Europe, America and Oceania. The USB-TO-LoRa-xF uses TCXO crystal oscillator and is recommended to be use in 0~85 temperature.
- Compared to traditional communication, LoRa Chirp Spread Spectrum (CSS) and Frequency Hopping Spread Spectrum (FHSS) technologies greatly improve the performance of long-range communication and anti-interference, widely used in military and industrial communication fields.
- Multiple communication methods can be set via software. Relay Networking: The radio station can realize multi-level relay networking, suitable for ultra long-range distance or complex environment networking communication, allows multi networking on the same region.
- Actual Test Environm
+
+
Overview
Specs
Reviews
Introduction
The USB-TO-LoRa-xF is a wireless data transfer unit with USB interfaces based on the SX1262 module. Adopts LoRa Modulate and Demodulate technology, with the advantages of anti-interference and long-distance communication (up to 5KM). Supports point-to-point, point-to-multipoint, relay network, AES, etc. Compact size and easy to install, suitable for the wireless data transmission and device control of industry standard or non-standard user protocol
Features
Adopts LoRa Modulate and Demodulate technology, anti-interference and long-distance communication
Adopts the original SX1262 chip, with -148dBm reception sensitivity and 22dBm emitt power
Supports preamble detection, with CRC, automatic packetization, 960 bytes cache functions
Supports LBT sending, RSSI output, AT command configuration
AES communication to ensure data transmission security
Supports multi-level relay networking to increase the wireless communication distance
Supports host configuration and firmware upgrade (support firmware customization for batch order)
Comes with Online Resources and Manual: n9. cl/nj6h7
1)Appearance
Interfaces: USB Type A, SMA-KE
female connector: 6dBi omni-directional antenna × 1
Enclosure: ABS case
Dimension: 56.40 × 18.40 × 12.52 mm
2)Wireless Parameters
Frequency Band: Sub-GHz (410~510MHz, 850~930MHz)
Signal Modulation: LoRa
Encryption Type: AES128
Emit Power: +22dBm Max
Reception Sensitivity: -148dBm
3)SERIAL Parameters
Baud Rate: 1200 ~ 115200bps
Parity Bit: None, Odd, Even
Data Bit: 8 ~ 9 bits
Flow Control: N/A
4)Environmental Requirement
Operating Temperature: TCXO version: 0 ~ 85
Humidity Range: 5% ~ 95% relative humidity
Package Content
USB-TO-LoRa-HF x1
Antenna (850~930MHz) x1
The USB-TO-LoRa-xF is a wireless data transfer unit with USB interfaces based on the SX1262 module. Adopts LoRa Modulate and Demodulate technology, with the advantages of anti-interference and long-distance communication (up to 5KM). Supports point-to-point, point-to-multipoint, relay network, AES, etc. Compact size and easy to install, suitable for the wireless data transmission and device control of industry standard or non-standard user protocol
Features
Adopts LoRa Modulate and Demodulate technology, anti-interference and long-distance communication
Adopts the original SX1262 chip, with -148dBm reception sensitivity and 22dBm emitt power
Supports preamble detection, with CRC, automatic packetization, 960 bytes cache functions
Supports LBT sending, RSSI output, AT command configuration
AES communication to ensure data transmission security
Supports multi-level relay networking to increase the wireless communication distance
Supports host configuration and firmware upgrade (support firmware customization for batch order)
Comes with Online Resources and Manual: n9. cl/nj6h7
Specifications
1)Appearance
Interfaces: USB Type A, SMA-KE
female connector: 6dBi omni-directional antenna × 1
Enclosure: ABS case
Dimension: 56.40 × 18.40 × 12.52 mm
2)Wireless Parameters
Frequency Band: Sub-GHz (410~510MHz, 850~930MHz)
Signal Modulation: LoRa
Encryption Type: AES128
Emit Power: +22dBm Max
Reception Sensitivity: -148dBm
3)SERIAL Parameters
Baud Rate: 1200 ~ 115200bps
Parity Bit: None, Odd, Even
Data Bit: 8 ~ 9 bits
Flow Control: N/A
4)Environmental Requirement
Operating Temperature: TCXO version: 0 ~ 85
Humidity Range: 5% ~ 95% relative humidity
Package Content
USB-TO-LoRa-HF x1
Antenna (850~930MHz) x1
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 15 days
- Return for replacement within: 30 days
- This item is covered by SongFengQiaoMaoYiShangDian Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...