High quality controller made by third party factory, not made by nintendo.
Feature: Wireless Bluetooth connection. With the function of vibration. With screenshot and axis.
Specifications: Product
material: ABS plastic
Handle weight: 237g
Handle size: 150mm*115mm*35mm ( 5.91 inches * 4.53 inch * 1.38 inch)
Packing weight: 323g
Packing size: 155mm*148mm*60mm ( 6.10 inches * 5.83 inch * 2.36 inch)
Battery capacity: 1300mAh 3.7V
Packing: 1 x Wireless Bluetooth Controller 1 x Charging Cable 1 x User manual
Of Host:
1. Connect the Bluetooth handle, the host's Controller Connection (Bluetooth) option is On, or turn off Flight Mode.
2. Select Controllers->Change Grip/Order on the main page, so that the host is in search of Bluetooth device status. (the operation does not need this operation)
Low Voltage Alarm: If the lithium battery voltage is lower than 3.55V ± 0.1V, the current channel lamp flash prompt voltage is low. If the lithium battery voltage is lower than 3.45V ± 0.1V, it will automatically sleep.
Note: if the host is difficult to match handle, there may be a host connection too many Bluetooth devices need to manually remove Bluetooth information (System Setting->Controllers and Sensors->DisConnect Controllers)
Handle Pairing Host:
Handle in turn off state, hold down the TYPE USB next to the small button 5 seconds into the code, the 4 LED is a fast light water channel state, indicating lamp connected successfully corresponding lit. If there is no synchronization in 2.5 minutes, it will automatically sleep. If the Bluetooth connection is successful, the corresponding channel indicates that LED is always bright (Switch host allocation).
Handle Re-Pairing Host: When the handle is turned off, press any key to wake up the handle. When it is awakened, it will automatically connect to the matching host. If 10 seconds fail, it will automatically sleep. When the handle is connected successfully, 5min not operate, and it will go to sleep state automatically. The host screen closes and the handle is dormant.