Quad M.2 NVME SSD to PCIe 4.0/3.0 x16 Expansion Card,4-Drive M-Key SSD 4x32Gbps Soft Raid Card with LED Indicator for 2280/2260/2242/2230 PCIe-Base M2 SSD

Features

This adapter allows you to add 4x NVMe SSDs simultaneously via PCI-e 4.0 / 3.0 x16 slot on the motherboard which is required to support PCIe x16 Bifurcation.

Full-speed transmission up to 4x 32Gbps.

The PCI-e 4.0 / 3.0 x16 Slot on motherboard is required to support PCIe x16 Bifurcation itself and could be set as"PCI-e x4x4x4x4" in BIOS.

All of the SSDs are M. 2 (M Key) NVMe SSD.

The individual LED Indicator will show each SSD's Working Status. 4 disks correspond to 4 LED indicators, the SSD access LED will light up, and the SSD read, write LED will flash

Supports NVME or AHCI protocol M. 2 SSD of 2230/2242/2260/2280

Support the formation of soft raid in Win10, or you may build raid via Third-party Software, and the 4 SSDs should be same model.

Hardware requirement

1. There is available PCI-e 4.0 or 3.0 x16 Slot on Mobo

2. The motherboard can support PCIe x16 Bifurcation itself, and can be set as"PCI-e x4x4x4x4" in BIOS

3. All of the SSDs are M. 2 (M Key) NVMe SSD

4. CPU has enough channels to support

Note

Does not support NGFF M. 2 (SATA-Based B key and B+M Key) SSD

Does not Support Hardware Raid

Motherboard must support "PCIEX16 Bifurcation", otherwise, only one M. 2 SSD can be recognized.