Your Browsing History
Meet Your Seller
Mini PCI-E to PCI-E Express 1X Extension Cord Adapter Card with USB Riser Card
Limited time offer, ends 09/15 By AxisLink
- USB Specification, Release 2.0 Hi-Speed (Up to 480Mbps); PCI Express Card Electromechanical (CEM) Specification 1.1; Utilize high quality flexible FCC cable which is extremely soft and compact; The flexible FFC cable is assembled with the based at 90!afor easy mounting in the case; High Quality Solder Points and plated Contacts for the Best Conductivity and Long Use
+
+
Overview
Specs
Reviews
Introduction:
1. This Extender is a debug and test tool to extend PCI-Express slot from MiniCard (mPCIe) slot. Design the FFC (Flat Flexible Cable) cable for flexible use. Not only for Full-size MiniCard adapter but also Half-size MiniCard by removing extra Full-size extensions.
2. As PCI Express x1 connector is edge-free / multi-lane, x4, x8 and x16 PCIe Cards are also available.
3. This extender is designed to minimize the signal degradation effects of the extender by proven design techniques. It's also a powerful tool for engineers and factory tests.
Specification: PCI Express Mini Card Electromechanical Specification Revision 1.0 PCI Express base Specification 1.1 (Up to 2.5G pbs) USB Specification, Release 2.0 Hi-Speed (Up to 480Mbps) System Management Bus (SMBus) Specification, Version 1.1 PCI Express Card Electromechanical (CEM)
Specification 1.1 Power Supply: 3.3V (For PCIe Slot, from MiniCard), 5V (For USB, from FDD 4 pin), 12V (For PCIe, from
FDD 4pin) Function: Easy Installation, Plug and Play No drivers needed for this MiniCard to ExpressCard Adapter Support Windows 2000/Server 2003/XP & XP 64-bit/Vista & Vista 64-bit/ 7 & 7 64-bit Supports both PCI Express based and USB 2.0 based MiniCard slot Supports USB 2.0 480 Mb/s data rate
Miscellaneous: WAKE#, PERST#
Requirements: PCI express mini card slot
Warning: If MiniCard slot on the host does not support PCIe or USB interface, the interface can not be supported. Other PCIe speed of PCIe 2.0 (5Gbps) is not guaranteed.
1. This Extender is a debug and test tool to extend PCI-Express slot from MiniCard (mPCIe) slot. Design the FFC (Flat Flexible Cable) cable for flexible use. Not only for Full-size MiniCard adapter but also Half-size MiniCard by removing extra Full-size extensions.
2. As PCI Express x1 connector is edge-free / multi-lane, x4, x8 and x16 PCIe Cards are also available.
3. This extender is designed to minimize the signal degradation effects of the extender by proven design techniques. It's also a powerful tool for engineers and factory tests.
Specification: PCI Express Mini Card Electromechanical Specification Revision 1.0 PCI Express base Specification 1.1 (Up to 2.5G pbs) USB Specification, Release 2.0 Hi-Speed (Up to 480Mbps) System Management Bus (SMBus) Specification, Version 1.1 PCI Express Card Electromechanical (CEM)
Specification 1.1 Power Supply: 3.3V (For PCIe Slot, from MiniCard), 5V (For USB, from FDD 4 pin), 12V (For PCIe, from
FDD 4pin) Function: Easy Installation, Plug and Play No drivers needed for this MiniCard to ExpressCard Adapter Support Windows 2000/Server 2003/XP & XP 64-bit/Vista & Vista 64-bit/ 7 & 7 64-bit Supports both PCI Express based and USB 2.0 based MiniCard slot Supports USB 2.0 480 Mb/s data rate
Miscellaneous: WAKE#, PERST#
Requirements: PCI express mini card slot
Warning: If MiniCard slot on the host does not support PCIe or USB interface, the interface can not be supported. Other PCIe speed of PCIe 2.0 (5Gbps) is not guaranteed.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 90 days
- This item is covered by AxisLink Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...