Your Browsing History
Meet Your Seller
JVFYI USB 2.0 Fast Ethernet SFP Fiber Adapter
Limited time offer, ends 01/31 By BRIGHTOR
- The USB2.0 FAST Ethernet SFP Fiber Network adapter used an controller AX88772A, Which is features USB2.0 to provide higher bandwidth and improved protocols for data exchange between the host and the device. USB2.0 also offers more advanced power management features for energy saving.
- The AX88772 supports IEEE802.3az-2010, also known as Energy Efficient Ethernet (EEE), and it is fully compliant with Microsoft NDIS5,NDIS6(IPv4,IPv6,TCP,UDP)checksum features ,and supports IEEE802 IP layer 2 priority encoding and IEEE802.1Q Virtual bridged Local Area network(VLAN).It is suitable for desktop, workstation, server, communication platforms etc.
+
+
Overview
Specs
Reviews
Integrated 100Mbps-SX/LX transceiver
Supports TYPE-A, USB2.0 and USB1.1
Supports CDC-ECM
Supports LPM(Link Power Management)
Supports Pair swap/polarity/skew correction
Crossover Detection &Auto-Correction
Transmit/Receive on-chip buffer support
Supports hardware CRC(Cyclic Redundancy Check) function
Supports power down/link down power saving
Upstream port: USB2.0 AF
Downstream port: SFP port
Chipset: ASIX AX88772A
Package content
1 x USB2.0 Fast Ethernet SFP Fiber Network Adapter
1 x Users Manual
1 x CD
Accessories
System Requirements
Linux, MAC OS10.6~10.13,Windows XP/Vista/Win7/Win8/Win8.1/Win10 32bit or 64 bit
Available USB2.0 port
Hardware Installation
Step 1: Plug the USB 2.0 to Fast Ethernet Adapter directly into an available USB port on your computer
Step 2: Connect one end of your network cable into the RJ45 port of USB 2.0 to Fast Ethernet Adapter
Step 3: Connect the other end of the network cable into an available Ethernet port on your router, switch, or any other networking device.
Driver Installation
Installing driver for Windows 98,2000. XP 32/64bit server2003 32/64bit vista32/64bit server2008 32/64bit Win7 32/64bit and Win8 32/64bit:
1.For Windows 2000/server 2003/XP Once the USB Adapter is installed , Windows will detect the board and attempt to install driver for it.
2.The Update Device driver Wizard will appear, informing you that it has found AX88772. Click the Cancel button.
3.Insert the provided CD into your disk drive.assume drive D.Brower to the following folder on the driver CD according to your operating system. Please locate and double-click on the D:\Ax88772a/Win2k_3_WinXP\Drivers_Setup/setup.exe file in the CD to launch the install program.
4.Follow the on-screen instructions to complete the software installation,if the driver is installed successfully, you will see the following devices under the System Properties:
5.Following the step to installing these operating systems
Windows 2000/2003/xp
D:\Ax88772a\Win2k_3_WinXP\Drivers_Setup
Windows Vista
D:\Ax88772a\Vista\Drivers_Setup
Windows 7
D:\Ax88772a\Win7\Drivers_Setup
Windows 8
D:\Ax88772a\Win8\Drivers_Setup
Installing Driver for Linux ,WinCE, Mac OS:
Please refer to the installation manual on the driver CD under these operating system folders to installing the driver.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 90 days
- This item is covered by BRIGHTOR Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...