Express 3.0 x16 x8 x4 to e-Based M Key M.2 NVMe and AHCI SSD Adapter Card with Aluminum Case Heat Sink and Thermal Pad

Feature:Add a M.2 NVME SSD to your PC without M2 slot on the motherboard.

Converts one e 3.0 3.0 x4 x8 x16 interface to M.2 (M Key) for NVMe/AHCI(-e Channel) SSD installation, No driver is required.

Supports E M.2 SSD (NVMe or AHCI -e Channel, Key-M), E 3.0 X4 32 Gbps bandwidth, and backward e 2.0 16Gbps bandwidth

Apply to 2280/2260/2242 / 2230mm M+V413:V419.2 SSD.

Support TRIM and UASP.

Supports e 1.0, e 2.0 and e 3.0 motherboard.( If install into -e 2.0 slot, the transfer speed will be 16Gbps)

Compatible with Windows/MAC/Linux, no driver required.

Note: Win7 and Windows Server 2008 R2 are not compatible with NVME SSD).

Not supported SATA-based M.2 SSD.

Come with aluminum Case heat sink and thermal pad, can realize NVME SSD's full potential of its high performance

Compatible with all kinds of NVMe SSDs like

XP941, SM951(NVMe), 950, PM961, 960EVO, SM961, PM951, 960EVO

600P.

Liteon T10.

HyperX Predator M.2.

Plextor M6e Series M.2 SSD.

Software:Windows 10/8, Windows Server 2012 R2, Linux series, Fedora, SUSE, Ubuntu, Red Hat native drivers support both e-NVMe and e-AHCI.

Note: Mac Pro 2009, 2010 and 2012 models support e-AHCI SSD only.

Note: Win7 and Windows Server 2008 R2 are not compatible with NVME SSD.

Note:1. Support M Key M.2 e based NVME or AHCI SSD (form factors 2230, 2242, 2260,2280) only.

2. NOT support SATA-based M.2 AHCI SSD (Key B/B+M), please confirm your SSD before purchase.

3. Mac Pro 2009, 2010 and 2012 models support e-AHCI SSD only, Win7 and Windows Server 2008 R2 are NOT compatible with NVME SSD.