Your Browsing History
We‘re shipping as usual! The Canada Post strike only affects certain remote deliveries and PO Boxes. Details
Holiday Shipping Details & Extended Holiday Returns- Free 15-day Returns
$69.64
Ships from China.
Meet Your Seller
Visit Hetai Store
FOLLOW
E 1 to 3 / 4 / 2 express 1X slots Riser Card Mini ITX to external 3 -E slot adapter e Port Multiplier Card VER005
- Good Quality
+
+
Overview
Specs
Reviews
E 1 to 3 / 4 / 2 express 1X slots Riser Card Mini ITX to external 3 -E slot adapter e Port Multiplier Card VER005
About Description:
-E 1X 1 TO 3 :
If you need more than one -E x1 slot on the motherboard was not any so much, it touches you can think about it. It consists of two parts, one main card, interface installed via -E X1 on the motherboard, two equipment cards, both of which are connected together via USB 3.0 cable. The device card also uses the United States Pericom Pericom PI7C9X bridge chip, for switching -E, -E between. But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even -E 1.x single-channel bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred -E slot is the best version above 2.0, the 3.0 version is better. Several Divided -E 1X slot all is gen2 mode, even if gen1 previously ,it can be ok!
E 1 TO 2-port / 4-port Riser Card :
-E 2/4 Port USB3.0 Mining Card Plug and Play Interface Type: E 1X to 2/4* USB Bus Type: -Express X1 Applicable Slot: -E X1, X4, X8, X16 Transmission speed: 5Gbps Use: For Mining Support system: DOS, Linux, Windows XP/7/8/10
Package List: 1 x -Express Riser Card
-E 1x 1 to 3 Port -E 1x:
Important Tips: Now this item the usb cable color is blue, not white. But don't worry, other all is same, such as the cable connector and the function is 100% same. If you care about the color, pls do not buy. Thanks!)
-E to Dual Port -E:
-E to 4 Port -E:
About Description:
-E 1X 1 TO 3 :
If you need more than one -E x1 slot on the motherboard was not any so much, it touches you can think about it. It consists of two parts, one main card, interface installed via -E X1 on the motherboard, two equipment cards, both of which are connected together via USB 3.0 cable. The device card also uses the United States Pericom Pericom PI7C9X bridge chip, for switching -E, -E between. But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even -E 1.x single-channel bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred -E slot is the best version above 2.0, the 3.0 version is better. Several Divided -E 1X slot all is gen2 mode, even if gen1 previously ,it can be ok!
E 1 TO 2-port / 4-port Riser Card :
-E 2/4 Port USB3.0 Mining Card Plug and Play Interface Type: E 1X to 2/4* USB Bus Type: -Express X1 Applicable Slot: -E X1, X4, X8, X16 Transmission speed: 5Gbps Use: For Mining Support system: DOS, Linux, Windows XP/7/8/10
Package List: 1 x -Express Riser Card
-E 1x 1 to 3 Port -E 1x:
Important Tips: Now this item the usb cable color is blue, not white. But don't worry, other all is same, such as the cable connector and the function is 100% same. If you care about the color, pls do not buy. Thanks!)
-E to Dual Port -E:
-E to 4 Port -E:
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 15 days
- Return for replacement within: 30 days
- This item is covered by Hetai Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...