GPOE-24V10W PoE Converter Power Over Ethernet Splitter Input12-30V, Output 24V PoE set up Injector For 12V Solar Controller

Origin: Mainland China
Plug Type: None
Item Type: POE
Spliter Certification: CE, FCC
Model Number: 24V 10W
Color: Black
Input: 12-30V
DC Output: 24V 10W
DC input connector: 2.1 mm x 5.5 mm adapter
Weight: 0.2 kg/pc
Data rate: 10/100/1000Mbps GPOE-24V10W PoE Converter Power Over Ethernet Splitter Input12-30V, Output 24V PoE set up Injector For 12V Solar Controller PoE 24v10w Converter This device provides a low cost solution for delivering or 12v power to a 24 volt device over 328ft of network cable. This scheme allows power to be carried on 10/100/1000 networks on CAT5E, CAT6 or CAT7 Ethernet network cable. Power into the device is either from the 2.1 mm DC connector OR from the RJ45 male pins 4, 5 + (plus) and 7, 8 (minus). The device passes 10/100/1000 Ethernet.
Product Specification: Data + Power in RJ 45 male connector DC input connector 2.1 mm x 5.5 mm adapter Data + Power out RJ 45 Female connector Network Type 10/100/1000Mbps Data Pins All 4 Pairs Power Pins input 4&5 + and 7 & 8 - Input Voltage 10v to 30VDC Output Voltage 24v +- 2% at. 42 amps Operating Temperature 0°C ~ 50°C Product description A of 12v can now power a 24 volt device like a Mikrotik or Ubiquiti. The higher DC voltage of 24 volts compared to 12 volts, means the wire loss is reduced by a factor of 4, thus carried with less loss over the spare pairs of the 10BASE-T or 100BASE-T network cable. The remote device extracts the DC voltage from the network cable and powers its internal electronics. If power is applied to the 2.