2 Pack 48V PoE Injector, 10/100Mbps POE Adapter Power Supply, IEEE 802.3af Compliant for Cisco Polycom Aastra Ubiquiti Unifi IP Cameras, IP Phones,

Applications:

IP Phone

Wireless Access point and client devices

Security Camera Systems

Features:

1. Used for 10/100Mbps networking

2. Save you money by using an existing Ethernet line to deliver data and power.

3. Easily connect any POE supported device to a non-PoE LAN switch port.

4. Used to connect a wireless access point, IP phone, network camera, or any POE powered device to a LAN switch.

5. Reduce Wiring Costs by powering devices through your existing Ethernet line rather than running new AC power lines.

6. You need to do is connect this iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device.

7. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems.

8. short circuit , Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 500mA and high voltages exceeding 50Vdc.

Specifications

2 RJ45 Shielded Ethernet ports

Input: 100-240VAC 50/60Hz

Output: 48V 0.35A 15.4W

Power feed Pins: V+ 4,5; V- 7,8;

Data rate: 10\100Mbps

Deliver power up to about 328 feet(100 meters)

What in Box?

2 x US Wall 48V PoE injector