8 Ports 6+2 PoE Switch Injector Power Over RJ45 Ethernet without Power Adapter Family Network System 10/100M

8 Ports PoE Switch 6+2 POE 10/100M Ethernet Power Over without Power Adapter for Cameras

Feature:

1. 6 10/100M nets port, using RJ45 interface (access) 2pcs 10/100M port RJ45 interface (uplink).

2. It is applied in the industrial control, weak network system integration project, the LAN is built up quickly, and the Ethernet development.

3. Monitoring, alarm, broadcasting, entrance guard, video intercom, parking lot, traffic, power, and other network digital weak current system engineering.

Specification:

Model: GL-AD6F-2C

Standard: IEEE 802.3/IEEE 802.3U/IEEE 802.3z/IEEE 802.3x/IEEE 802.1P ANSI/IEEE STD 802.3 10/100M Adaptive

Agreement: CSMA / CD, TCP / IP

Cables: unshielded twisted pair (UTP) or shielded twisted pair (STP), CAT 5 or Cat6 categories, maximum length 100m

Fiber optic cable: optical wavelength: 850nm / 1310nm / 1550nm

Single mode single fiber: 25-120KM

Single mode double fiber: 25-120KM

Port: 6pcs 10/100M Internet access, using RJ45 connector to connect to two 10/100M Internet access, RJ45 connector (uplink).

Network sequence: 4 chips 100M 1 orange white 2 Orange 3 Green white 6 green

POE mode: 3-8 ports support constrained POE non-protocol power supply 4 Blue 5 blue white power positive (+), 7 Brown White 8 Brown negative (-), need to be used with cable separator

Connection and transmission mode: 100M net electric hybrid power

Uplink transmission: 100M RJ45 Internet access

Flow control: full duplex 1EEE802.3x flow control; half duplex back pressure flow control.

Transmission mode: store and forward

Exchange level: 2 level

After bandwidth: 1G

MAC address format: 4K

Delay rate: 9.6us