Fan Blower DC Turbo Ball Bearing 3D Printer Accessories Wire 5V 12V 24V

100% brand new and high quality

Features:

Made of special and premium materials,it is high temperature resistant and extremely durable.

Guaranteed to continuously run 30,000 hours at 40°.Speed: 6800±10%

Used in humidifier,aromatherapy and other small appliances series;small heat radiating communication equipment;military equipment;intelligent industrial control equipment plate heat,high precision medical equipment ;PC CPU server dissipation and so on.

Bearing Blower only, other accessories demo in the picture are not included!

Tips:

1. Do not the blade and the power cord around the fan or pull the power cord. The shaft and power cord will be damaged.

2. Please avoid dust, water droplets and small insects from entering, which will affect the life and defective products;

3. Do not use in flammable gases and any harmful environment;

4. Please use it within six months. Long-term storage will affect the performance of the fan due to the storage environment;

5. When the fan is running, do not attempt to lock the fan for a long time. This will cause the fan to burn out due to continuous stop and no heat.

6. When installing the fan, please pay special attention to the noise caused by resonance or vibration;

7. When the fan is dropped from a height of 60cm during handling or operation, it will have some influence on the balance of the blade, especially the ball bearing to avoid falling;

8. The torque of the screw of the lock case must not exceed 4Kgf; please do not use a screwdriver, iron rod, etc. to block the fan, this will damage the fan;

9. Please note that the fan will hurt your fingers when running at high speed.