Meet Your Seller

NGW Electronic

See Seller Store

Main image of NGW-1pc Grove - Solid State Relay V2

Alt view image 2 of 6 - NGW-1pc Grove - Solid State Relay V2

Alt view image 3 of 6 - NGW-1pc Grove - Solid State Relay V2

Alt view image 4 of 6 - NGW-1pc Grove - Solid State Relay V2

Alt view image 5 of 6 - NGW-1pc Grove - Solid State Relay V2

Alt view image 6 of 6 - NGW-1pc Grove - Solid State Relay V2

Shop All Seeed Studio Products | Visit NGW Electronic Store

NGW-1pc Grove - Solid State Relay V2

Advantages over mechanical relays:
1-Solid-state relays have much faster switching speeds compared with electromechanical relays, and have no physical contacts to wear out.
2-Totally silent operation.
3-No physical contacts means no sparking, allows it to be used in explosive environments, where it is critical that no spark is generated during switching.
4-Increased lifetime, even if it is activated many times, as there are no moving parts to wear and no contacts to pit or build up carbon.
5-Compact, thin-profile SSR of monoblock construction with an all-in-one lead frame incorporates a PCB, terminals and heat sink, which is much smaller than mechanical relays, and can integrate more channels.
Disadvantages:
1-When closed, higher resistance (generating heat), and increased electrical noise.
2-When open, lower resistance, and reverse leakage current.
3-Only works for AC laod.

Overview

Specs

Reviews

Instead of using coil, packaged solid-state relays (SSR) use power semiconductor devices such as thyristors and transistors, which provide a much faster switching speed than the mechanical relays. The Grove - Solid State Relay V2 is based on the high-quality G3MC202P module, which allows you to use a 5VDC to control MAX. 240VAC. With the help of Grove interface, it becomes very convenient to use the SSR with your arduino.

1*Please be careful when working with high voltage AC load, please do not operate with power on.

2*This relay only works with AC load, if you use DC load, once the relay is turned on, it will always stay on.
3*Due to the leakage current, we do not recommend you to use this relay with low power appliance.

Typical Applications

Operations that require low-latency switching, e. g. stage light control.

Devices that require high stability, e. g. medical devices, traffic signals.

Situations that require explosion-proof, anticorrosion, moisture-proof, e. g. coal, chemical industries.

Pin Map

Technical details

Dimensions 40mm x20mm x25mm
Weight G. W 131g
Battery Exclude
Operating Input Voltage 4~6V
Rated Input Voltage 5V
Load Voltage Range 75 to 264 VAC 50/60 Hz
Rated Load Voltage 100 to 240 VAC 50/60 Hz
Load Current 0.1 to 2 A
Leakage Current 1.5 mA max. (at 200 VAC)
Insulation Resistance 1, 000 M min. (at 500 VDC)
Operating Temperature -30°C to 80°C (with no icing or condensation)
Operating Humidity 45% to 85%RH
Zero Cross support
Part List

Grove - Solid State Relay V2 1
Grove Cable 1
A set of Acrylic Shell 1

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
CONTACT

Return Policies

Return for refund within: 30 days
Return for replacement within: 60 days
This item is covered by NGW Electronic Return Policy

Manufacturer Contact Info

For a directory of all our manufacturers, please click below.
Manufacturers Directory

Item#: 9SIBP1TJX06447