Your Browsing History
Meet Your Seller
RP2350-PiZero Development Board,Uses RP2350 Dual-Core & Dual-Architecture Chip,
- RP2350-PiZero is a high-performance and cost-effective microcontroller board, based On RP2350, adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
- 520KB of S RAM, and 16MB of onboard Flash memory, with reserved solder pads for PS RAM chip expansion. Type-C connector for easier use
- Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard TF card slot for reading and writing TF card. Onboard Lithium battry recharge/discharge header, suitable for mobile scenarios
- USB 1.1 with device and host support. Support Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB
- Adapting 5 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 2 x 12-bit ADC, 16 x controllable PWM channels. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 12 × Programmable I/O (PIO) state machines for custom peripheral support
+
+
Overview
Specs
Reviews
RP2350-PiZero is a high-performance and cost-effective microcontroller board, based On RP2350, adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
520KB of S RAM, and 16MB of onboard Flash memory, with reserved solder pads for PS RAM chip expansion. Type-C connector for easier use
Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard TF card slot for reading and writing TF card. Onboard Lithium battry recharge/discharge header, suitable for mobile scenarios
USB 1.1 with device and host support. Support Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB
Adapting 5 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 2 x 12-bit ADC, 16 x controllable PWM channels. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 12 × Programmable I/O (PIO) state machines for custom peripheral support
520KB of S RAM, and 16MB of onboard Flash memory, with reserved solder pads for PS RAM chip expansion. Type-C connector for easier use
Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard TF card slot for reading and writing TF card. Onboard Lithium battry recharge/discharge header, suitable for mobile scenarios
USB 1.1 with device and host support. Support Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB
Adapting 5 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 2 x 12-bit ADC, 16 x controllable PWM channels. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 12 × Programmable I/O (PIO) state machines for custom peripheral support
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 90 days
- This item is covered by GearZap Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...