1.5inch OLED Display Module 128×128 Resolution I2C OLED Screen for Raspberry Pi, Arduino, STM32,SH1107 Driver Chip,Black/White Display Color

1.5 inch OLED Display Module, 128×128 Resolution, SPI / I2C Communication, Black / White Display Color 1.1. 5inch OLED Display Module Embedded SH1107 Driver Chip, SPI / I2C Communication Comes with examples for Raspberry Pi, Arduino, STM32, etc. Features At A Glance Ultra-narrow bezel, conpact size, with onboard voltage translator Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications

OPERATING VOLTAGE--- 3.3V / 5V RESOLUTION---128 × 128 pixels COMMUNICATION INTERFACE---4-wire SPI / I2C DISPLAY SIZE--- 26.855 × 26.855 mm DISPLAY PANEL---OLED PIXEL SIZE--- 0.185 × 0.185 mm DRIVER---SH1107 MODULE SIZE--- 38.50 × 44.50 mm Control Interface VCC---Power ( 3.3V / 5V input) GND---Ground DIN---Data input CLK---Clock input CS---Chip selection, low active DC---Data/Command selection (high for data, low for command) RST---Reset, low active Package Content 1.5 inch OLED Module (B) x1 GH 1.25 7PIN cable x1