1.69inch LCD Display Module 240×280 Resolution 262K Display Colors IPS Screen for Raspberry Pi, Arduino, STM32,Embedded ST7789V2 Driver Chip,SPI Interface

1.1. 69inch LCD Display Module Embedded ST7789V2 Driver Chip, Using SPI Interface Comes with examples for Raspberry Pi, Arduino, STM32, etc. 2. Onboard Voltage Translator Compatible With 3.3V / 5V Power Input 3. Onboard SPI Control Interface For Use With Controller Boards Like Raspberry Pi / Arduino / STM32

Specifications

Operating voltage: 3.3V /5V (Please ensure that the power supply voltage and logic voltage are the same, otherwise it will not work properly. )
Communication interface: 4-wire SPI
Display Panel: IPS
Control chip: ST7789V2
Resolution: 240 (H) RGB × 280 (V)
Display size: 27.972 mm × 32.634 mm
Display R angle: 4-R5 (mm)
Pixel pitch: 0.11655 mm × 0.11655 mm
Dimensions: 31.5 mm × 39.0 mm Module & Control Chip 1. The embedded controller used in this module is ST7789V2, an LCD controller with 240 × RGB × 320 pixels, and the pixels of the LCD itself is 240 (H) × RGB × 280 (V), so the internal RAM of the LCD is not fully used. 2. This LCD supports input color formats of 12-bit, 16-bit, and 18-bit per pixel, which are RGB444, RGB565, and RGB666. This demo example uses the RGB565 color format, which is also a commonly used RGB format. 3. The LCD uses a four-wire SPI communication interface, which greatly saves GPIO ports with faster communication speeds. 4. TThe resolution of this module is 240 (H) x RGB x 280 (V), but due to the four round corners (see specifications for dimensions), some parts of the input images may not be displayed. Package Content 1.69 inch LCD Module x1 GH 1.25 20cm 8Pin cable x1 Note Development Resources is provided, please contact us if you have any problem.