Out of stock
This item is currently out of stock and it may or may not be restocked.
Add to wish list(Found on 1 wish list)
Shop it at NeweggBusiness.

Noctua NA-FH1, 8 Channel Fan Hub for up to Eight 12V or 5V Based 4-pin PWM or 3-pin Fans (Black)

  • 8-way fan splitter board for powering, controlling and monitoring multiple fans, transmits PWM signal from PC motherboards or optional NA-FC1 fan controller to all connected fans
  • 4-pin (for 5V and 12V fans) and S-ATA (for 12V only) inputs can be used simultaneously (power via S-ATA, RPM & PWM via 4-pin), safety fuses provide protection against overcurrent and short-circuits
  • Up to 54W total power via S-ATA (12V fans only) and 24W via 4-pin interface, ideal both for 12V PC case fans and 5V applications (with Noctua 5V fans that include USB power adaptor cables)
  • Easy installation on any magnetic surface such as steel PC case panels thanks to four strong mag-nets, included NA-EC1 input cable for connection to motherboard fan headers
  • Full compliance with all applicable safety standards (EN 62368-1, EN 55035, EN 55032, UL-507), CE, UKCA and UL certification, renowned Noctua quality backed up by a 6 year manufac-turers warranty
Overview
Specs
Reviews (2)
image for this item
image for this item

The NA-FH1 is a high-quality 8 channel PWM fan hub that allows up to eight PWM fans to be run and controlled simultaneously via a single PWM motherboard fan header. Non-PWM fans can be controlled by adjusting the input voltage. Supporting both 12V and 5V fans with 4-pin PWM and 3-pin connectors, the NA-FH1 is highly flexible and suitable both for PC environments and other 12V- or 5V-based applications. It can be powered either via its S-ATA input (for 12V fans, up to 54W) or 4-pin PWM input, both of which are protected against overcurrent with a self-resetting fuse for maximum safety even in case of short-circuits on the connected devices or cables. The two ports can also be used concurrently with the device, automatically taking power via S-ATA and exchanging RPM and PWM signals via the 4-pin interface. Topped off with CE, UKCA and UL certifications and full compliance with all applicable safety standards, the NA-FH1 is a premium choice for powering and controlling up to eight fans.

image for this item

When powered via it's S-ATA interface (for 12V fans only), the NA-FH1 can run fans with a combined power draw of up to 54W. When using the 4-pin PWM input only (for 5V or 12V fans), the maximum power draw can go as high as 24W.

Caution: Do not place directly on hard disk drives, keep at least 5cm distance. When powering via the 4-pin input from a PC motherboard, please check your motherboard manual for the maximum current of the fan header and make sure not to exceed it.

image for this item
Controlling high-power fans safely
If both its S-ATA and 4-pin input ports are connected, the NA-FH1 will automatically draw power via S-ATA and use the 4-pin port for PWM control and RPM monitoring only. This way, it is possible to control fans with high power consumption safely without risking damage to the motherboard.  
image for this item
RPM and status monitoring
The NA-FH1 transmits the RPM speed signal of the fan connected to the first port to the motherboard for speed monitoring. For additional watchdog functionality, all ports feature status LEDs that light up if an RPM signal is being received and go off if the fan stops or fails.  
image for this item
Suitable for 12V and 5V fans
Supporting both 12V and 5V (4-pin power input only) operation, the NA-FH1 not only works great with 12V PC fans, but is also an elegant solution for running multiple Noctua 5V fans, many of which include USB adaptor cables that can be used to connect the NA-FH1 to mobile phone power supplies or power banks.  
image for this item
Easy installation with magnets
The NA-FH1 features four strong neodymium magnets on the rear side, which allows it to simply snap into place on any magnetic surface such as inside steel PC cases. On non-magnetic surfaces such as aluminum PC cases, the flat rear side of the device makes it possible to easily fix it with double-sided tape or velcro tape.

 

Safety certifications

Unlike many cheap fan hubs, the NA-FH1 has been carefully tested for product safety and EMC compliance. Carrying CE, UKCA and UL certifications and meeting all applicable standards (EN 62368-1, EN 55035, EN 55032, UL-507), it is a safe, quality device through and through.

 

image for this item
Output connectors: 8x 4-pin PWM
Input connectors: 1x S-ATA (for 12V fans only), 1x 4-pin PWM
Max. power via S-ATA input: 54W
Max. power via 4-pin input: 24W
Operating voltage: 5-12V
Operating temperature: -40°C to +60°C
Flammability class: UL-94 V-0
Certifications: CE, UKCA, UL
Fan compatibility: all Noctua 12V and 5V fans, many third party fans
Scope of delivery: NA-FH1, NA-EC1 4-pin PWM input cable
Size: 93x43x12.5mm
Weight: 31g
Caution: The S-ATA input is for use with 12V fans only. Do not use the S-ATA input with 5V fans!
Safety standards: EN 62368-1, EN 55035, EN 55032, UL-507
Products
Fan compatibility 12V and 5V fans 24V, 12V, and 5V fans 24V, 12V, and 5V fans
Input connectors 1x S-ATA (for 12V fans only), 1x 4-pin PWM 1x 5.5mm (outer diameter) / 2.1mm (inner diameter) barrel connector, 1x 4-pin PWM 1x 5.5mm (outer diameter) / 2.1mm (inner diameter) barrel connector, 1x 4-pin PWM
Output connectors 8x 4-pin PWM 8x 4-pin PWM 8x 4-pin PWM
Top cover -
NV-PS1 power supply - -

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

  • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
  • Read full details
  • CONTACT

Return Policies

Manufacturer Contact Info

LOADING...