Mini PCI-E PCI Express to USB Riser Card SIM Card Slot for WWAN LTE 3G/4G Module with 9Pin USB Cable Converter

Features of the new version of Mini PCI-E to
USB:


1. The lock of the fixed module is added to facilitate the installation of the user and improve the reliability and stability of the module.

2 Add 4 screw holes to the PCB, so that this riser card can be used inside the small industrial control chassis.

3. Increase the distance between the SIM card holder and the rear components to make it easier for users to remove and install the SIM card

4. Increase the USB 4-wire input hole plate, which can directly weld the USB wire
Working principle: Mini PCI-E52pin interface defines USB signal and 3.3V voltage. The adapter card converts the 5V voltage of the USB interface to 3.3V through the LDO chip, and supplies the module and USIM/SIM to work. The signal bus is USB signal

Specification Description:


1.
Product size specification: 85*31mm

2. Mini PCI-E design complies with version 1.30 industry specification

3. The USB design conforms to the USB 2.0 industry specification and is backward compatible with the 1.1 specification

4. This adapter card is suitable for full-height size (30*50-51mm) 4G/3G and other modules (USB bus),

5. Working status LED real-time display

6. The product does not require any software driver

Instructions for use:
This product is suitable for many brands of 3G modules, such as HuaWei, ZTE, Longshang, Fangge, Meige, Yuge, Quectel, AIRCARD, OPTION, SAMSUNG, Huayu, Datang and other brands 3G card, used to surf the Internet through the USB port and flash, debug, test and unlock the 3G module. It can also be used to test the WiFi module (USB bus) and Mini PCI-E interface card (USB bus) of the USB bus through USB.

Reminder:
Special statement: This product is an adapter board, which converts MniniPCI-E to USB, not a 3G or 4G network card. This product does not contain 3G or 4G modules. If there is no 3G or 4G module, you cannot access the Internet! This adapter board is mainly used for DIY or testing 3G and 4G modules. This component does not include a shell.