Corn Electronics Universal 11 Colors Remote Control LED Acrylic GPU Brace 11'' - GIGABYTE

This GPU brace is designed to work with a wide variety of video cards, but it is not compatible with all models-in particular, cards with oddly super thick shaped fan shrouds (angled, rounded, etc) are also problematic. - It will occupy the three slots directly below your video card-the chassis you use must have slots there (most ITX cases are too small). - Any other cards (Network Card/Sound Card)located in those three slots below the video card must either be low profile or both shorter than 3.5" in length-no taller than the slot bracket. - You can install the part that makes actual contact with your GPU in just several locations along the brace.

- MSI logo is relatively large and prominently placed. If you have a window on your chassis it will be clearly visible. There is a protective brown film on one side of the brace when it is shipped out, but that should be removed before you install it. This GPU brace is what we use in many of our systems to help support larger, heavier video cards. Modern video cards utilize large heatsinks to cool the GPU effectively and quietly, but they weigh so much that in some situations they can actually damage the PCI-E slot on the motherboard.

This universal acrylic GPU brace fastens directly to the case and provides support for cards to help prevent them from sagging over time. Package List 1* 450mm*280mm*5mm Main Brace 1* Support Riser 1* Molex (4-Pin) Power Cable & Remote Control (Battery not included) 5* Screws& Nuts