FTDI FT232RL USB TO RS232 D-SUB 25PIN DB25 MALE ADAPTER TNC SERIAL COMMUNICATION CABLE FOR KANTRONICS KPC2 KPC-3+ AND ARM DEBIAN 5M Length

INDUSTRIAL FTDI FT232RL CHIP USB TO RS232 D-SUB 25PIN DB25 MALE ADAPTER TNC SERIAL COMMUNICATION CABLE FOR KANTRONICS KPC2 KPC-3+ AND ARM DEBIAN
This cable is designed to make connection between USB port and serial devices (RS232), NOT for parallel printer or other devices based on parallel protocol (IEEE-1284), even though both have DB25 connector. It is a USB to Serial cable with Software Handshaking using only three signals: TXD (2), RXD (3), RTS (4), CTS (5), GND (7). Please doubel check your devices setup prior to purchase.
Works with Kantronics KPC2, KPC-3+ and ARM debian Successfully interfaced our Kantronics TNCs to a raspberry pi running Debian without a hitch. It has indicator lights inside the clear USB end to indicate activity. Connector appears to be well-assembled.
Operating Systems:
Windows
10/8/ 8.1 /7/Windows Server 2008/2003/Vista/XP/98
Linux
Mac
OS X/9/8
Windows
CE. NET (Version 4.2 and greater)
Android
32 and 64 bit operating systems are both supported.
FTDI DRIVER DOWNLOADING:
https: //ftdichip. com/drivers/vcp-drivers/
INSTALLATION GUIDELINE:
https: //ftdichip. com/document/installation-guides/
Package Contents:
1 X FTDI USB to DB25 Cable
Length: 1.8M /6FT, 3.0M /10FT, 5.0M / 16.4FT (Approx. )
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
If you have special requirements, such as cable length, wire gauges and pinouts, please consult to me online or leave me a message.
If you receive the goods, and have any dissatisfaction or need assistance, please feel free to contact me or leave me a message.
FTDI usb rs232 to DB25 connector cable, usb serial connector to db25 cable, usb TNC programming cable, TERMINAL NODE CONTROLLER cable