Free Shipping
Sold and shipped by: LuckyShop LuckyShop
43 Ratings (40% Positive)
  • $46.44

Are you an E-Blast Insider?

PoE Extender 1 Port 10/100M Gigabit IEEE802.3af for Security Systems IP Camera Poe Splitter IP Phone Network PoE Signal Extender

In stock.
Ships from China.
Fees for brokerage and duty included in price. Most customers receive within 7-32 days.
  • Comply with IEEE 802.3af Power over Ethernet. 10/100M Supported.Extend the range of PoE an additional 120 meters.
  • Automatically detects and protects PoE equipments from being damaged by incorrect installation.
  • Plug-and Play no configuration required.
  • 1 port PoE extender can forward both ethernet and PoE. Power for 1 terminal equipment via Cat5 UTP cable.
  • Quality Products and Guarantees,If you have any question or want to know more, welcome to send email
Overview
Specs
Reviews
Highlights: USE
PROPERLY: The PoE Extender can only be used for CCTV IP network camera PoE data extension and amplification (CAN NOT TRANSMIT HOME NETWORK OR OTHER NETWORK CAMERA SIGNAL). BEFORE YOU INSTALL IT, PLEASE CAREFULLY READ ITS INSTRUCTION IN THE PACKAGE. USING IN WRONG APPLICATION ENVIRONMENT MAY CAUSE NO WORK. FOR THE DEVICE TO ACHIEVE YOUR DESIRED RESULTS, DO NOT CONNECT "input" AND "output" PORT REVERSELY. PoE input-1 RJ45 port,
PoE output: 1 RJ45 port; (If you only need 1-Port Input 4-Port Output POE Extender, you may refer to
ASIN: B0198H6EUK)Suggest to use this poe extender indoors with waterproof housing.
Network Medium: Cat5 or better UTP cables, less than 120m; Before installing, refer to your product manual guide and the installation guide as the last product image show. ALL EXTENDERS SELL AFTER PASSING STRICT TEST AS THE 4TH IMAGE SHOW. PoE Extenders can increase the transmission distance for Ethernet data and PoE power up to 120m via Cat5 UTP cables. It offers you great flexibility to extand the distance of
PoE;
NOTE:

1. Using high quality transmission cable which can transmit up to 100~120m, if using poor cable that will not reach to 80meters.
2. If the power consumption in front end device is too large, its working voltage may not be enough.
3. Cascading series too much, the voltage will be low, it also may not work.
4. Need to match with Poe switches as the last image. Strictly refer to poe extender Manual Guide to install the equipment, that will perfectly meet with your project requirement.
Features: Only transmit PoE signals.
1. Comply with IEEE 802. af Power over Ethernet; 2.10 /100M Supported;
3. Extender the range of PoE an additional 120 meters;
4. Automatically detects and protects PoE equipments from being damaged by incorrect installation;
5. Plug-and Play no configuration required; 6.1P ort PoE extender can forward both ethernet and PoE power for 1 terminal equipment via Cat5 UTP cable.
Product Review: 1-Port PoE Extender has 2 10/100M Lan ports, among them, one for power input, the other for power output. Comply with 10/100BASE-TX, IEEE 802.3 af-PoE. Power input for single port is 13W. Power output for single port is 12.2W.
Other Specification: Port
Description: PoE input-1 RJ45 port,
PoE output: 1 RJ45 port;
Network Medium: Cat5 or better UTP cables (less than 120m);
Repeater Mode: Store and forward;
MAC Address Table: 2K; Packet
Buffer Memory: 48 Byte;
Switching Capacity: 400Mbps;
PoE Standard: IEEE 802.3 af;
PoE Port Power: input power-13Watts, output power- 12.2W atts;
PoE Power Supply Type: 1/2+, 3/6-, Mode A, End-Span;
Network Protocol: IEEE 802.3 i-10BASE-T, IEEE
802.3 u: 100BASE-TX, IEEE 802.3 x-Flow Control, IEEE 802.3 af-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU, EMC Directive 2004/108/EC;
Working Temperature: 0°C~40°C, Working
Humidity: 10%~90%, No Co

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

  • Return for refund within: 30 days
  • Return for replacement within: 30 days
  • This item is covered by LuckyShop Return Policy

Manufacturer Contact Info

LOADING...
TOP