Laptop Battery for Apple A1964 A1989 A2251 13.3-inch MacBook Pro (2018-2020) 11.36V 58.2Wh, High Capacity, 1-Year Warranty

**Product Overview**
Upgrade or replace your aging MacBook Pro battery with this high-performance 11.36V 58.2W h replacement, specifically designed for 13.3 -inch MacBook Pro models from 2018 to 2020 (Touch Bar versions). Whether your original battery is swollen, not holding a charge, or showing Service Recommended, this battery restores full portability and performance.

**Important Voltage Warning**
Please confirm your original battery voltage is ** 11.36V ** before ordering. This battery is NOT compatible with 11.4V or 7.6V models. Using an incorrect voltage battery may cause system errors or damage.

**Compatible Models & Part Numbers**
- Apple MacBook Pro 13.3 -inch (2018): A1989 (EMC 3359)
- Apple MacBook Pro 13.3 -inch (2019): A1989, A2159 (EMC 3359, 3456)
- Apple MacBook Pro 13.3 -inch (2020): A2251, A2289 (EMC 3579, 3598)
- Replacement Part Numbers: A1964, A1989, A2251, A2289, A2159, 020-00097, 020-00104, 020-00105, 020-00106, 020-00107

**Specifications Table**
| Parameter | Value |
|-----------|-------|
| Voltage | 11.36V |
| Capacity | 58.2W h |
| Cell Type | Lithium-ion (Li-ion) |
| Color | Silver/Black (as original) |
| Weight | Approx. 220g |
| Cycle Life | 500+ cycles |
| Protection | Overcharge, over-discharge, short circuit, over-temperature |

**Comparison Table: Original vs. Replacement**
| Feature | Original Apple Battery | Our Replacement |
|---------|-----------------------|-----------------|
| Voltage | 11.36V | 11.36V (exact match) |
| Capacity | 58.2W h | 58.2W h (same) |
| Cell Quality | OEM Grade A | Grade A (tested) |
| Warranty | 1 year (limited) | 1 year (full) |
| Price | High | Affordable |

**Installation Tips**
1. Power off your MacBook completely and disconnect the charger.
2. Use a P5 pentalobe screwdriver to remove the bottom case screws.
3. Gently disconnect the old battery connector (use a plastic spudger if needed).
4. Remove the adhesive strips carefully (heat with a hairdryer if necessary).
5. Place the new battery in position, connect the cable, and snap the connector firmly.
6. Reattach the bottom case and screws.
7. Charge the battery to 100% before first use for optimal calibration.

**Package Includes**
- 1 x Replacement Battery
- 1 x Set of Screws (if applicable)
- 1 x Installation Guide (digital)

**Note**
This battery is a third-party replacement, not an original Apple product. It is fully tested and certified to meet or exceed OEM performance standards. Please ensure your device model matches the list above before purchasing. If you have any questions, contact us anytime were here to help!