Battery for Lenovo Legion Go 8APU1 8APU2 8APU3 L23M2PK0 49.5Wh 15.4V 3210mAh Compatible with L23D2PK0 L23C2PK0 High Capacity, Fast Shipping, 12-Month Warranty

**Product Overview**
This replacement battery is specifically designed for the Lenovo Legion Go handheld gaming console (models 8APU1, 8APU2, 8APU3). It uses the original specification L23M2PK0 with a voltage of 15.4V and a capacity of 49.5W h (3210mAh), ensuring full compatibility and reliable performance. Whether you are replacing a worn-out original battery or need a spare for travel, this battery delivers consistent power output and safe operation.

**Important Voltage Warning**
Please confirm that your device requires a 15.4V battery. Using an incorrect voltage (e. g., 11.55V or 14.4V ) may cause charging failure, system instability, or permanent damage to the motherboard. This battery is NOT compatible with standard Lenovo laptop batteries or other handheld devices.

**Compatible Models & Part Numbers**
- Lenovo Legion Go 8APU1
- Lenovo Legion Go 8APU2
- Lenovo Legion Go 8APU3
- Original Part Numbers: L23M2PK0, L23D2PK0, L23C2PK0

**Specifications Table**

| Parameter | Value |
|-----------|-------|
| Battery Type | Lithium-Ion (Li-ion) |
| Voltage | 15.4V |
| Capacity | 49.5W h / 3210mAh |
| Cell Grade | Grade A |
| Protection | Overcharge, Overdischarge, Short Circuit, Overcurrent, Overtemperature |
| Cycle Life | 500 cycles (80% retention) |
| Operating Temperature | 0°C 45°C (charging) / -10°C 60°C (discharging) |
| Certification | CE, FCC, RoHS |
| Warranty | 12 Months |

**Comparison Table (Original vs. Replacement)**

| Feature | Original Lenovo Battery | Our Replacement |
|---------|------------------------|----------------|
| Voltage | 15.4V | 15.4V (identical) |
| Capacity | 49.5W h | 49.5W h (same) |
| Cell Quality | Standard OEM | Grade A (higher consistency) |
| Protection IC | Basic BMS | Enhanced BMS with multi-protection |
| Price | High (OEM) | Affordable (aftermarket) |
| Warranty | 6-12 months | 12 months |

**Installation Tips**
1. Power off the device completely and disconnect any charger.
2. Use a plastic pry tool to carefully open the back cover of the Legion Go.
3. Locate the battery connector and gently disconnect it from the motherboard.
4. Remove the original battery (do not puncture or bend).
5. Connect the new batterys connector firmly until you hear a click.
6. Reassemble the back cover and charge the device for at least 4 hours before first use.
7. If the device does not power on after installation, try a hard reset (hold power button for 15 seconds).

**Package Includes**
- 1x Replacement Battery (L23M2PK0)
- 1x Installation Tool Kit (plastic pry tool + screwdriver)


**Note**
This is a third-party replacement product, not an original Lenovo accessory. It is fully tested for compatibility and safety. Please dispose of old batteries according to local regulations.