Model: LE8245F
| Internal Interface | PCI-Express 2.0 X2 |
|---|---|
| External Interface | 2 x 2500Mbps + 2 x 100/1000Mbps |
| Chip | 4 x RTL8125BG |
| LED Indicator | Yellow for 100/1000Mbps signal, Green for 2.5Gbps |
| OS Compatibility | Windows/Linux/MAC OS/DOS; Centos/RHEL/Ubuntu/Debian/DSM/OpenWrt/PFSense/OPNSerse/IKUAI; VMWare ESXi |
| Installation | Play and Plug, there is no need extra driver. But if your PC does not recognize the network card or |
4 Port 2.5 Gigabit Ethernet Network Card
With the 2.5G Base-T Technology, GLOTRENDS LE8245F 2.5Gbps network card can reach 2.5x faster than typical Gigabit adapters. Backward compatible with 1000/100Mbps.
Quad Ports PCI Express 10/100/1000/2500M Ethernet on Motherboard, Notebook, or Embedded systems
- Integrated 10M BASE-Te and 100/1000M/2.5G BASE-T 802.3 compatible transceiver
- Supports 2.5G Lite (1G data rate) mode
- Auto-Negotiation with Extended Next Page capability (XNP)
- Compatible with NBASE-TTM Alliance PHY Specification
- Supports PCI Express 2.1
- Supports pair swap/polarity/skew correction
- Crossover Detection & Auto-Correction
- Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
- Supports jumbo frame to 16K bytes
- Supports quad core Receive-Side Scaling (RSS)
- Supports Protocol Offload (ARP & NS)
Internal 2.5Gb LAN Network for Instant File Sharing
- Please make sure that both connected ports support 2.5Gb
- The connected cable is at least CAT5E
PCIE 2.0 X2 (10Gbps ) Upstream and 6.4Gbps Downstream Bandwidth
- Upstream Speed: PCI-Express 2.0 X2 bus bandwidth = 10Gbps
- Downstream Speed: 4 LAN ports share 6.4Gbps
- So 4 LAN ports share 6.4Gbps, only 2 ports can operate at full 2.5Gbps simultaneously, and the other two ports operate at 100/1000Mbps.
Package Including
- Quad port PCI-E NIC Network Card
- 12cm Regular-profile bracket and 8cm Low-profile bracket
