Meet Your Seller
Wind Controller 12V/24V 300W/600W, Wind Turbine Generator Controller Regulator, Wind Power Regulator FW12/24
Limited time offer, ends 10/18 By HOLDOUMEN
- brand new and high quality.
- This controller controls the wind turbine to automatically the battery.
- When the battery is full, the fan is braked by the internal circuit automatic control. When the battery voltage drops to the recovery voltage, the fan resumes charging the battery, thus protecting the fan and the battery.
- The rectifier and brake circuit part of the controller adopts integrated module design.
- Fully , fully and fully with level IP67
+
+
Overview
Specs
Reviews
Product description Wind Controller, Wind Generator Controller Regulator, FW12/24 with IP67 LED Display Model, 300W/600W GREAT DESIGN The rectifier and brake circuit part of the controller adopts integrated module design. GOOD PERFORMANCE Fully, fully and fully with IP67 GREAT CHOICE brand new and
Specification:
Condition: Brand
New Model: FW12/24
Battery Rated Voltage: 12/24V Wind
Rated Power: 300W/600W Brake Start
Voltage (Factory Value): 14.4V / 28.8V Brake Recovery
Voltage (Factory Value): 13.2V / 26.4V
Display Mode: Led (Light-Emitting Diode Display)
Working Temperature And Humidity Range: -35? -+75?
Quiescent Current:?
15 mA: IP67
Weight: Approx. 255g / 9.0 oz
Size: Approx. 100 * 87 * 28mm / 3.9 * 3.4 * 1.1 in
Wiring:
1. Connect the positive and negative terminals of the battery to the positive (red) and negative (black) terminals of the battery.
2. Connect the three-phase output voltage of the wind to the three-phase input (green line) terminal of the controller fan.
Package List: 1 * Wind
Controller Note:
1. Verify that the wind output voltage matches the rated voltage of the battery.
2.
Wiring sequence: first connect the positive and negative poles of the battery, then connect the three-phase voltage output of the fan. Please connect the battery and wind to the controller in strict accordance with the instructions. If the polarity is reversed or the wrong position is connected, the system will work abnormally and even cause the controller to be completely damaged.
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Specification:
Condition: Brand
New Model: FW12/24
Battery Rated Voltage: 12/24V Wind
Rated Power: 300W/600W Brake Start
Voltage (Factory Value): 14.4V / 28.8V Brake Recovery
Voltage (Factory Value): 13.2V / 26.4V
Display Mode: Led (Light-Emitting Diode Display)
Working Temperature And Humidity Range: -35? -+75?
Quiescent Current:?
15 mA: IP67
Weight: Approx. 255g / 9.0 oz
Size: Approx. 100 * 87 * 28mm / 3.9 * 3.4 * 1.1 in
Wiring:
1. Connect the positive and negative terminals of the battery to the positive (red) and negative (black) terminals of the battery.
2. Connect the three-phase output voltage of the wind to the three-phase input (green line) terminal of the controller fan.
Package List: 1 * Wind
Controller Note:
1. Verify that the wind output voltage matches the rated voltage of the battery.
2.
Wiring sequence: first connect the positive and negative poles of the battery, then connect the three-phase voltage output of the fan. Please connect the battery and wind to the controller in strict accordance with the instructions. If the polarity is reversed or the wrong position is connected, the system will work abnormally and even cause the controller to be completely damaged.
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 90 days
- This item is covered by HOLDOUMEN Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...