IDE Adapter 40 Pin IDE to Connector 3.5 HDD IDE Hard Disk DVD Burner Adapter Converter With 7Pin- Data Cable

Wiring method:

1\Some adapter boards and hard drives/optical drives require power supply. The must be set to the MASTER position. To work properly.

2\If the built-in power cord is insufficient, you can also use the 4pin power supply on the computer power supply.

3\Generally, people use old hard drives or CD-ROM drives. The connector pins may be rusty, so you can scrape them with a small blade. Plug in several times. Avoid bad contact.

Product name: IDE to adapter card

Use model: JM20330

Product material: PCB double-layer circuit board

Scope of application: suitable for IDE optical drives, burners, 3.5-inch hard drives, video recorder hard drives

Compatible system: compatible with windowsXp\win7\win8 32-bit\64-bit system

Compatible and support various brands of desktop computers:

1.The video recorder's IDE hard disk is converted to , and it is connected to the port of the motherboard.

2. Convert 3.5-inch IDE hard disk to , connect to the motherboard port for use

3. Convert IDE optical drive to , connect to motherboard port for use

4. Convert IDE burner to , connect to motherboard port for use

5. The desktop 3.5-inch IDE hard disk can be transferred to the video recorder (please format the hard disk on the computer first).

6. The transferred hard disk can be used as master and slave (requires system reinstallation, refresh in BIOSS, etc.).

7. The converted optical drive can be used as a system.

8. The adapter card supports a parallel port hard disk with a maximum capacity of 1000G.

9. For IDE devices using adapter cards, the cap must be inserted in the MASTER position.