LINOVISION Mini Passive 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

LINOVISION'S Passive 2-Ports POE SplitterLINOVISION 2 ports POE extender is designed to supply POE power to two POE devices through one Cat5/6 cable, and no power adapter is required. With this POE splitter, the cabling cost can be dramatically reduced. Moreover, users can easily add extra POE device (like IP cameras, wireless AP or IP phones) to existing POE cable without running a new cable.
Up to 1, 000ft POE + Data ExtentionExtra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1, 000ft POE + Data transmission is provided. (The 2nd POE Extenders POE Input should be connected to the 1st POE Extenders Out port, not Camera port)
Compliant to IEEE 802.3 af/at StandardThis POE Extender works with all standard IEEE 802.3 af/at POE Switches, POE injectors or POE NVRs. And the POE Outputs supply power to standard POE devices, like POE IP security cameras, IP phones, wirelesss AP, IP Speakers, etc. The recommended power consumption per POE device is less than 8 Watt, and the max bandwidth is 100Mbps.
Plug-n-Play InstallationThis POE Extender can be simply plugged with a POE cable from a standard IEEE 802.3 af/at POE Switch (or POE Injector / POE NVR), and then connect two POE devices to the output ports. No configuration or setup is required.