Pro-Ject T1 EVO Belt-Drive Turntable with Ortofon OM10 Cartridge - Walnut

The Pro-Ject T1 EVO is a high-quality belt-drive turntable designed to deliver clear and detailed music. It is built with heavy, anti-vibration parts to ensure your records play smoothly and accurately right out of the box.

The wooden plinth is CNC-machined and contains with no plastic components or hollow spaces. This construction limits resonance that can obscure low-level detail. Each unit is assembled by hand in Europe.

1. Quiet belt drive rotates an aluminum sub-platter, isolating the motor from the record surface.
2. Electronic control switches between 33 and 45 rpm; no manual belt repositioning is required.
3. Measured speed variance: 0.7 % at 33 rpm, 0.6 % at 45 rpm.
4. Wow and flutter: 0.25 % (33 rpm) and 0.23 % (45 rpm).

An 8 mm thick blasted-glass platter adds rotational mass while remaining acoustically inert. The felt mat supplied with the turntable decouples the vinyl surface from the platter glass.

A stainless-steel axle running in a brass bushing is machined to within 0.001 mm tolerance, supporting smooth rotation and a 65 dB signal-to-noise ratio.

1. Integrated headshell design avoids removable joints that can introduce play.
2. Effective length: 218.5 mm; overhang: 22 mm.
3. Effective mass: 8 g.

The included moving-magnet cartridge uses an elliptical diamond stylus for accurate groove tracing and extended high-frequency response. Factory installation and alignment reduce setup time.

1. RCA outputs connect to an external phono preamp or integrated amplifier with phono input.
2. Included regulated 15 V DC power supply draws 4.5 W maximum.

Dimensions: 415 × 100 × 335 mm (W×H×D). Weight: 3.8 kg. The supplied dust cover protects the platter and tonearm when not in use.

1. Dust cover with hinges
2. Felt record mat
3. RCA phono cable
4. Belt and sub-platter pre-installed
5. 15 V DC power adapter