Free Shipping
Sold by: VANTRUE Canada VANTRUE Canada
1 Ratings (100% Positive in the last 12 months)
  • $22.99
Price Alert

Meet Your Sellers

Are you an E-Blast Insider?

Vantrue N2 Pro, N2, T2, N1 Pro, X4, X3 Dash Cam 10ft Mini USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Mini USB Dash Cams

In stock.
Ships from Canada.
  • ?Compatible 12 – 24V Vehicles?This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
  • ?24/7 Parking Surveillance?Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
  • ?Power Supply?Directly to the ignition wire for power only so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
  • ?Low voltage protection?It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery.
  • ?Mulitiple uses?Mini USB plug compatible with all mini usb dash cams such as Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1/X4, GPS navigator and radar detector etc, it always frees up the cigarette lighter .
Overview
Specs
Reviews
Key Features
Compatible with 12-24Vdc for car or truck installations.
Perfect for 24/7 Parking Surveillance.
Low voltage protection protects against battery dying.
Works well with Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1 and all the other mini usb dash cams!
Keep 12V or 24V outlet free, charge your phone at the same time.
Less static when you’re listening to the radio. Less Complicated Install with the installation video.

What’s in the box
Vantrue 10ft Mini USB Dash Cam Hardwire Kit with User Manual
Mini/LP ACN Add-A-Circuit Fuse Holder
Mini ACS Add-A-Circuit Fuse Holder
ATO ACU Add-A-Circuit Fuse Holder
Micro2 Add-A-Circuit Fuse Holder


24/7 Parking Surveillance

Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
Directly to the ignition wire for power only so it can turn on and off with the ignition.


Compatible 12 – 24V Vehicles

This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power.

Low Voltage Protection

Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.4V(12V cars) or 22.8V(24V cars), thus preventing it draining the battery.

Find the Correct Fuse Slot

Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.

Connect the Red Wire

Once you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation.

Ground the Hardwiring Kit

Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards.

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

Manufacturer Contact Info

LOADING...