Your Browsing History
We‘re shipping as usual! The Canada Post strike only affects certain remote deliveries and PO Boxes. Details
Holiday Shipping Details & Extended Holiday Returns
Meet Your Seller
HMX X Sillyworks Nap Switch, Factory-Lubed Linear Thocky Mechanical Keyboard Switch(45g,90PCS)
- HMX × Sillyworks Nap retains the consistently smooth and clean typing feel that HMX switches are known for. Due to their tight tolerances, some of the earlier versions of HMX switches had batches where the initial keypress felt sticky between the stem and the top housing.
- The switch uses the newest of HMX molds that adjusted the tolerance to keep the wobble free typing experience while removing the potential sticky feel at the top of the keypress. It also has minimal stem wobble in comparison to other switches which allows for a smooth typing experience.
- The HMX × Sillyworks Nap Switch has a solid bottom out that lies within the mid to low tones giving it the potential to sound either creamy or thocky depending on the build configuration. On keyup has a soft and poppy sounding top out that lies within the mid tones.
- Compatibility: Switches are designed with general MX structure so that they can fit most keycaps sets with (X) cross stem. This greatly improves the compatibility and y
+
+
Overview
Specs
Reviews
HMX x Sillyworks Nap Switch
Type: Linear
Manufacturer: HMX
Material: UPE stem, PA66 top cover, and bottom cover
Operation Force: 37±5gf/ 45±5gf
Bottom-out Force: 43±5gf/53±5gf
Total travel: 3.6±0.2mm
Pre-Travel: 1.9±0.5mm
Factory Lubed: Yes
Socket Support: Compatible with all socket types - Outemu, Kailh, and Gateron
Used for: Mechanical Keyboard
Applicable to: Keycaps of height such as Cherry, XDA, SA, OEM, etc.
Notes:
1. Due to the different monitor and light effects, the actual color of the item might be slightly different from the color shown in the pictures.
2. Due to transportation reasons, some pins of the switch may be bent, but it will not affect the use after correcting with tools such as tweezers.
3. Usually, the number of switches is 70 or more, we will use PET jar for transportation to avoid the damage caused by the switches during transportation.
Type: Linear
Manufacturer: HMX
Material: UPE stem, PA66 top cover, and bottom cover
Operation Force: 37±5gf/ 45±5gf
Bottom-out Force: 43±5gf/53±5gf
Total travel: 3.6±0.2mm
Pre-Travel: 1.9±0.5mm
Factory Lubed: Yes
Socket Support: Compatible with all socket types - Outemu, Kailh, and Gateron
Used for: Mechanical Keyboard
Applicable to: Keycaps of height such as Cherry, XDA, SA, OEM, etc.
Notes:
1. Due to the different monitor and light effects, the actual color of the item might be slightly different from the color shown in the pictures.
2. Due to transportation reasons, some pins of the switch may be bent, but it will not affect the use after correcting with tools such as tweezers.
3. Usually, the number of switches is 70 or more, we will use PET jar for transportation to avoid the damage caused by the switches during transportation.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 15 days
- Return for replacement within: 30 days
- This item is covered by POLING Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...