10ML Green Oil UV Solder Mask BGA PCB Paint Prevent Corrosive Arcing Soldering Paste Flux Inks Soft Nylon Brush 9 LED Light

Model

W-001 solder mask green oil

Material

Acrylic oligomer

Dielectric strength

500V/mil

Solvent resistance

Trichloroethane boiled for 2 minutes without falling off

Solder resistance

255-265 degree 10s * 3 times

Hardness

5H

Curing condition

UV light

Capacity

10cc

Application

PCB board repair essential materials

Gross weight

About 55.0g/set

Feature:

1. Green oil, a liquid photo solder resist, is an acrylic oligomer.

2. Due to the special nature of the material, the solder mask oil will not dry naturally. UV curing is required.

3. As a protective layer, it is applied to the circuit and substrate on which the printed circuit board does not need to be soldered, or used as a solder resist.

4. The purpose is to protect the formed line pattern for a long time.

Industrial applications:

1. Prevent physical disconnection of the conductor circuit.

2. In the welding process, the short circuit caused by the bridge is prevented.

3. Welding only in the parts that must be welded to avoid solder waste.

4. reduce copper contamination of the welding trough.

5. Prevent deterioration and corrosion of insulation due to external environmental factors such as dust and moisture.

6. It has high insulation and makes it possible to increase the density of the circuit.

Instructions:

1. Apply the soldering mask oil ink to the motherboard that needs to be repaired.(Please apply as evenly as possible, and make sure the coating is not too thick.)

3. To wipe the wrong substrate, it is recommended to use industrial alcohol or industrial cleaner.