MAIWO K3015 SATA 5 Bay Duplicator Dock for 2.5'' SSD, 5Gbps Transfer Rate, USB3.0 to SATA SSD Docking Station Cloner, with Clone Progress Digital Display, Support 6TB*5 Capacity

Limited time offer, ends 01/08 By MAIWO Direct

HDD Count Supported: 5 bay

Size: 2.5" SATA

Model: 5 Bay 2.5'' SATA Duplicator Cloner

5 Bay 2.5'' HDD/SSD duplicator, compatible with 2.5" SATA/I/II/III HDD/SSD hard drive
This 5bay dock supports one key 1 to 4 offline clone, no computer needed, and supports 5 disks writes and reads at the same time
USB3.0 external interface,theoretical transmission speed can reach 5Gbps, downwards compatible with USB2.0
Support large capacity expansiond for your computer, a single disk supports external storage up to 6TB, 5 disks total up to 30TB
LED light show clone progress 0%, 1%,2%,3%...100%. You can monitor the working status clearly.
The 12V-3A power adapter to supply a stable and reliable energy for massive data transfer,more stable transmission,more convenience in use.

MAIWO 5 Bay 2.5 Inch SATA Hard Drive HDD SSD Duplicator/Cloner

Main Features:

This 5 Bay Docking Station supports 2.5" SATA HDD/SSD Hard Drive or Adapter with 2.5 inch SATA interface, NOT support 3.5 inch or IDE Hard Drive.
Expand your storage space professionally,every disk supports external storage up to 6TB. Read and write up to five disks or SSDs simultaneously.
Support offline clone function, 1:4 cloning, no need to connect the computer, just connect the power supply.
Plug and Play, tool-free installation with fast and convenient access to the drive bays,no driver needed.
Digital LED Indicator for cloning progress from 1% 2% to 100%, and if there is an error in one disk, the LED will flash, very clear working status to monitor the entire progress.
Comes with an independent 12V/3A power supply.

5 Bay 2.5inch SATA Docking Station with fast Read&Write and Clone Function

User Guid

How to read&write

How to clone

Put the 2.5" SATA HDD/SSDs in the slot of the dock
Switch the mode to"Clone"
Switch the power "ON"
Press the clone button twice,cloning begins when there is "dididi",the digital LED start with 0%
When it shows 100%,there will be "didi" about 2-3 times,clone is complete

Note: the capacity of target HDD should equal to or be larger than the source HDD.

Switch to change Clone/PM Mode

Color	Black
Type	Dock
Material	Aluminum
Internal Interface	SATA
External Interface	USB 3.0
HDD Count Supported	5 bay
Number of Bay	5
Power	12V3A
Specifications	5 Bay 2.5inch SATA Docking Station with fast Read&Write and Clone Function

Dimensions	20.519.37 CM
Weight	0.77KG

Meet Your Seller