1: This full HD supports 3D, 4K x 2K, ARC HDCN0020M1 audio splitter, can connect HDMI-Compatible signal source to a single HDMI-Compatible display device(such as TV, projector) and independent output stereo + SPDIF signal, to achieve HDMI-Compatible signal audio synchronization separation, and support ARC audio backhaul function.
2: One way HDMI-Compatible dual-mode input, converted into one HDMI-Compatible+ Audio (SPDIF+R/L) output
3: Support audio output: SPDIF+ analog R/L, support full HD, full 3D, 4K x 2K
4: Support ARC function: In the case of HDTV directly receiving audio and video content, the HDTV transmits the audio directly to the A/V amplifier receiver via the HDMI-Compatible cable without an additional cable.
5: HDMI-Compatible dual-mode working mode, the terminal two in one, effectively reducing the number of interfaces
Can realize audio synchronous separate output, with ADV, 2.0CH, 5.1CH three audio modes to choose from
6: LED indicator, when the signal source or signal terminal is working, the corresponding indicator will light up.
[HDMI-Compatible Audio Splitter]
The role of the toggle switch:
Audio output mode selection switch, which can realize 2CH, 5.1CH, ADV [advance Audio] three modes of cyclic switching (when switching to 5.1CH,
The digital signal receiving terminal must support DTS/DOLBY-AC3 decoding, otherwise there is no sound output when the DTS/DOLBY-AC3 signal is input.
To output sound, switch to 2CH. When the audio mode is in ADV [advance Audio], the output of the sound will depend on the audio format supported by the backend.
For example, the back end has an HDMI-Compatible interface power amplifier device that supports 7.1 decoding, and the distributor will output a sound signal of 7.1 channels. [When the signal output signal is 7.1 channels]
[HDMI-Compatible Audio Splitter] Usage and function description:
1: Connect the mobile device to the input of the audio splitter via the HDMI-Compatible cable to the HD source (HDMI-Compatible port) or via the MHL-HDMI cable in the accessory.
2: Connect the supported HDMI-Compatible display device to the audio splitter HDMI-Compatible output.
3: Connect the audio splitter R/L connector to the audio device with an audio cable.
4: Connect the audio splitter SPDIF interface to the audio device with a fiber optic cable.
