Gigabit 90W PoE++ Injector 54-56V Adapter, 10/100/1000Base-T IEEE 802.3bt PoE Standard Active POE+, Plug and Play for Wireless Access Points/PTZ/Videophones

90W PoE++ InjectorUp to 90W Gigabit PoE++ Injector, with one Ethernet Input (data only) port and one Output (data + power) port. PSE90G supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones, safe and reliable power to WLAN access points.
Complies with IEEE 802.3btIt complies with IEEE 802.3bt PoE standard, supports 10/100/1000Base-T LAN environment. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points.
Auto-Sensing TechnologyThis POE Injector can detect both POE and non-POE devices. It will communicate with the device and provide an appropriate power source, for non-standard POE equipment, it will automatically detect and actively shut down to protect the equipment. And Safe on Low Power Devices Receive Only the Power They Need.
Plug and Play without SettingOnly need to connect a PoE network device, which is suitable for most installation scenarios. By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators dont need to use AC power adapters anymore. Unique interlock function, easy to install.

Standards Compliance	IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-Tx Fast Ethernet, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet
Connector	RJ-45 10/100/1000 Mbps
Pin Assignment and Polarity	1/2(+), 3/6 (-)
Input Power AC Input Voltage	100~240 VAC
Indicators	AC Power (Orange) / PoE (Green)

Operating Temperature	-20 ~55°C
Storage Temperature	-25 ~ 70°C
Dimensions (L x W x H)	144mm x 57mm x 40mm (5.62in x 2.24in x 1.57in)
Weight	350g (0.77lbs)
Package Content	1 x POE Injector 1 x Power Cable 1 x Quick Installation Guid

	PSE802G	PSE90G

Customer Reviews	—	—
Price	—	—
Power	30 Watts Max	90 Watts Max
Speed (Mbps)	10/100/1000 Mbps	10/100/1000 Mbps
Indoor	?	?
IEEE802.3bt	no data	?
IEEE 802.3 at/af	?	?
Output Power Voltage	54 Vdc Maximal	54-56 VDC
Requirements AC Input Current	0.8A@ 100-240 VAC	=1.5A @ 100~240 VAC

Connect the device

In a network environment where it is not convenient to arrange the power supply, the POE Injector can be used to power network camera/APs and other devices through the network cable.

Compatible with multiple devices

ip camera

Surveillance

Works with IP Cameras

router

Router

Works with WIFI access points

AP

Works with wireless access points

videophone

Videophone

Works with Videophone